Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b)) | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
Registration plate lamp issues | 3 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b) | 2 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 2 |
Nearside Steering rack gaiter split (2.2.D.2d) | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL CORRODED.. (7.1.1 (a) (i)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i)) | 1 |
Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced SPOT WELDED (6.1.1 (d) (i)) | 1 |
Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced SILL AND SPOT WELDED (6.1.1 (d) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Windscreen washer not working | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength at outer sill (5.3.6 (a) (i)) | 1 |
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced at outer sill (7.1.1 (a) (i)) | 1 |
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Stop lamp not working (1.2.1b) | 1 |
Registration plate issues | 1 |
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 1 |
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill repair failed and insecure within seat base and anchorage point (7.1.1 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Exhaust emissions exceed manufacturers specified limit measured 5.51 plated value 1.80 (8.2.2.2 (a)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
Central Seat belt anchorage prescribed area strength or continuity significantly reduced n/s outer sill (7.1.1 (a) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Nearside Rear Rear reflector likely to become detached tail light insecure (4.8.1 (b) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases exhaust back box (6.1.2 (a)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Anti-lock braking system warning lamp does not illuminate ABS non functional warning on dash (1.6 (a)) | 1 |
Nearside Rear Position lamp likely to become detached Unit insecure (4.2.1 (c) (ii)) | 1 |
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
Exhaust fumes entering cabin Rear tail pipe missing allowing fumes to enter cabin (6.1.2 (b) (i)) | 1 |
Offside Stop lamp not working (1.2.1b) | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Nearside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
Nearside Front Headlamp not working on dipped beam (1.7.5a) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Rear Axle has excessive vertical movement between stub axle and axle beam (5.1.2 (c) (i)) | 1 |
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
Exhaust emits excessive smoke or vapour of any colour (7.4.B.4) | 1 |
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
Rear Exhaust system not adequately supported (7.1.1) | 1 |
Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
Offside Stop lamp emits other than a steady red light Lamp Damaged (1.2.1e) | 1 |
Exhaust emits an excessive level of metered smoke (7.4.B.3a) | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |