Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Registration plate lamp issues | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Emissions not tested |7.0| | 2 |
Battery insecure |1.9.1| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Rear brake binding | 2 |
Rear parking brake recording little or no effort | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Centre Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footwell several places (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footwell several places (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
Offside Front Wheel bolt|s| loose |4.2.A.1e| | 1 |
Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brakes imbalanced across an axle | 1 |
Exhaust system not adequately supported center silencer |7.1.1| | 1 |
Brake relay lever has restricted free movement |3.5.1k| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill / out rigger |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner door step |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill / out rigger |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
Rear Brake valve leaking |3.6.A.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Steering column universal joint has excessive play |2.1.5| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pipe excessively corroded | 1 |
Rear brake application uneven | 1 |