MOT History from tests of petrol CITROEN MOTORs year 1992

Review the list of common CITROEN MOTOR failures below or to perform a specific mot history check on your CITROEN then use our popular KnowYourCar service

mot history

Pass percent:14.29%

(The average a petrol CITROEN MOTOR year 1992 passes without issue)

Based on:7 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	5
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Registration plate lamp issues	2
Front brake disc in such a condition that it is seriously weakened	2
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt \|6.1.7 \|g\| \|ii\|\|	1
Parking brake lever has excessive movement indicating incorrect adjustment \|1.1.6 \|c\|\|	1
Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing \|2.4.A.3\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Offside Rear All position lamps not working \|1.1.A.3b\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Nearside Rear Direction indicators not working \|1.4.A.2c\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Horn not working \|1.6.2a\|	1
Registration plate issues	1
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Centre Rear Brake load sensing valve seized \|3.6.E.3\|	1
Nearside Front Fuel pipe excessively chafed \|7.2.2\|	1
Windscreen washer not working	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Brake hose damaged	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brake pipe excessively corroded	5
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Registration plate lamp issues	2
Front brake disc in such a condition that it is seriously weakened	2
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt \|6.1.7 \|g\| \|ii\|\|	1
Parking brake lever has excessive movement indicating incorrect adjustment \|1.1.6 \|c\|\|	1
Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing \|2.4.A.3\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Offside Rear All position lamps not working \|1.1.A.3b\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Nearside Rear Direction indicators not working \|1.4.A.2c\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Horn not working \|1.6.2a\|	1
Registration plate issues	1
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Centre Rear Brake load sensing valve seized \|3.6.E.3\|	1
Nearside Front Fuel pipe excessively chafed \|7.2.2\|	1
Windscreen washer not working	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Brake hose damaged	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1

MOT History from tests of petrol CITROEN MOTORs year 1992

Find us on Facebook