| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 7 |
| Headlamp aim out of alignment | 6 |
| Registration plate lamp issues | 5 |
| Brakes imbalanced across an axle | 5 |
| Exhaust system not adequately supported |7.1.1| | 5 |
| Battery insecure |1.9.1| | 4 |
| Nearside Headlamp not working on main beam |1.7.5a| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Horn not working |1.6.2a| | 3 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Offside Rear fog lamp missing |1.3.2a| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Rear brake binding | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Rear fog lamp not working |1.3.2b| | 2 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Windscreen washer not working | 2 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Brake pipe excessively corroded | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Headlamp not working on dipped beam |1.7.5a| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Headlamp insecure (4.1.1 (c)) | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring shackle mount holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring shackle mount holed (5.3.6 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Central Front Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Front Electrical wiring insecure |1.9.2a| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Front Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (marked) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (marked) (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under battery (6.1.1 (c) (i)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (marked) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 1 |
| Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Front Service brake imbalanced across an axle nearside front binding (1.2.1 (b) (i)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |