| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 17 |
| Offside Side repeater not working |1.4.A.2c| | 6 |
| Service brake: efficiency below requirements |3.7.B.7| | 5 |
| Nearside Stop lamp not working |1.2.1b| | 5 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 5 |
| Mechanical brake component has restricted free movement | 3 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Brake pipe excessively corroded | 3 |
| Brakes imbalanced across an axle | 3 |
| Offside Front Headlamp insecure |1.7.3| | 3 |
| Horn not working |1.6.2a| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Exhaust mounting missing |7.1.1b| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Side repeater not working |1.4.A.2c| | 2 |
| Registration plate lamp issues | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Brake valve leaking |3.6.A.1| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 1 |
| Rear Brake valve leaking |3.6.A.1| | 1 |
| Rear Brake valve has an excessive discharge of oil |3.6.E.1| | 1 |
| Steering column flexible coupling is excessively deteriorated |2.1.5| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Side repeater incomplete |1.5.A1b| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Registration plate issues | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Brake valve leaking front to rear brake pipe union loose (1.1.7 (d) (i)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Windscreen washer not working | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Headlamp insecure |4.1.1 |c|| | 1 |
| Oil leaking continuously from engine posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Brake valve leaking such that brake functionality is affected load valve (1.1.7 (d) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel housing area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel housing area (5.3.6 (a) (i)) | 1 |
| Windscreen has damage | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |