| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 24 |
| Headlamp aim out of alignment | 18 |
| Rear brake binding | 7 |
| Horn not working |1.6.2a| | 6 |
| Service brake: efficiency below requirements |3.7.B.7| | 6 |
| Brakes imbalanced across an axle | 5 |
| Registration plate lamp issues | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 5 |
| Parking brake lever has no reserve travel |3.1.6b| | 4 |
| Windscreen washer not working | 4 |
| Rear parking brake recording little or no effort | 4 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 3 |
| Rear brake application uneven | 3 |
| Battery insecure |1.9.1| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Emissions not tested |7.4.B.1| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded Wings both sides |2.4.A.3| | 1 |
| Nearside Front All position lamps not working |1.1.A.3b| | 1 |
| Offside Rear Upper Outline marker lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed and partly fibre glassed (6.2.2 (d) (i)) | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength by side step (5.3.6 (a) (i)) | 1 |
| Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Centre Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Side repeater insecure |1.4.A.2b| | 1 |
| Offside Side repeater insecure |1.4.A.2b| | 1 |
| Offside Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Centre Upper Stop lamp not working High level stop light less than 50% of LEDs working |1.2.1b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded as marked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded as marked |6.1.B.2| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| All outline marker lamps not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under door step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under door step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at subframe mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in severalplaces (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced cab body at rear (7.1.1 (a) (i)) | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Nearside Front Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Centre Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around strut (6.1.1 (c) (i)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Central Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Offside Rear Outline marker lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch at strut top (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch at strut top (5.3.6 (a) (i)) | 1 |
| Offside rear brake juddering severely |3.7.A.5b| | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/ rear of van body |6.1.B.2| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Lower Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills marked in yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Nearside Front Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Headlamp aim unable to be tested dip beam bulb not working (4.1.2 (b)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Front Direction indicator incorrect colour Both sides. (4.4.3 (a)) | 1 |
| Rear Direction indicator incorrect colour Both sides. (4.4.3 (a)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill. (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Nearside Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Offside Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Registration plate issues | 1 |
| Centre Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and Offside spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Centre Rear Upper Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Nearside Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Centre Upper Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Lower Brake hose connection leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 1 |
| Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Front Battery insecure |1.9.1| | 1 |
| Nearside Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Front Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Rear Direction indicator not working WIRE |1.4.A.2c| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Brake pipe inadequately supported hose to strut |3.6.B.1| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Nearside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |