>

MOT History from tests of petrol CHRYSLER SEBRINGs year 2005

Review the list of common CHRYSLER SEBRING failures below or to perform a specific mot history check on your CHRYSLER then use our popular KnowYourCar service

mot history
Pass percent:64.04%
(The average a petrol CHRYSLER SEBRING year 2005 passes without issue)
Based on:89 MOT Tests
Most common failuresNo# failures
Registration plate issues8
Headlamp aim out of alignment5
Windscreen wiper does not clear the windscreen effectively4
Windscreen washer not working 3
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Parking brake: efficiency below requirements |3.7.B.7|3
Direction indicators incorrect colour all four |1.4.A.2f|3
Nearside Headlamp aim beam image kick up to the offside |1.8|3
Service brake: efficiency below requirements |3.7.B.7|2
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|2
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))2
Rear fog lamp not working (4.5.1 (a) (ii))2
Anti-lock braking system warning lamp indicates an ABS fault2
Rear fog lamp not working |1.3.2b|2
Rear parking brake recording little or no effort2
Registration plate lamp issues2
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii||2
Offside Front Side repeater insecure |1.4.A.2b|2
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a|2
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))2
Offside Front Position lamp not working (4.2.1 (a) (ii))2
Offside Headlamp aim beam image kick up to the offside |1.8|2
All direction indicators not working |4.4.1 |a| |ii||1
Windscreen wiper not working |3.4 |a||1
Rear fog lamp tell-tale missing |4.9.1 |a| |ii||1
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))1
Horn not working (7.7 (a))1
Nearside Front Side repeater missing |1.4.A.2b|1
Offside Front Side repeater missing |1.4.A.2b|1
Rear fog lamp switch missing |1.3.1a|1
Offside Rear Rear fog lamp not working |1.3.2b|1
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e|1
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e|1
Offside Side repeater insecure |1.4.A.2b|1
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Service brake efficiency below requirements (1.2.2 (a) (i))1
Offside Side repeater incorrect colour |1.4.A.2f|1
Nearside Side repeater incorrect colour |1.4.A.2f|1
Nearside Front Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a|1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Rear fog lamp switch missing (4.5.3 (a) (ii))1
Rear fog lamp missing (4.5.1 (a) (ii))1
Parking brake efficiency below requirements (1.4.2 (a) (i))1
Nearside Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Offside Rear fog lamp not working |1.3.2b|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Offside Front position lamp|s| not working |1.1.A.3b|1
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))1
Nearside Side repeater not working |1.4.A.2c|1
Offside Rear fog lamp not working |4.5.1 |a| |ii||1
Nearside Front Position lamp not working |4.2.1 |a||1
Nearside Side repeater not working |4.4.1 |a| |ii||1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||1
Offside Side repeater not working |1.4.A.2c|1
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii||1
Nearside Front Side repeater not working |1.4.A.2c|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Centre Stop lamp not working |1.2.1b|1
Offside Front Side repeater incorrect colour |1.4.A.2f|1
Front position lamp|s| not working |1.1.A.3b|1
Exhaust system not adequately supported |7.1.1|1
Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Parking brake inoperative on one side (1.4.1 (a))1
Offside Parking brake inoperative on one side (1.4.1 (a))1
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Rear brake disc in such a condition that it is seriously weakened1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill sec. (6.1.1 (c) (i))1
Rear fog lamp missing |1.3.2a|1
Nearside Front Direction indicator not working |1.4.A.2c|1
Offside Front Direction indicator not working |1.4.A.2c|1
Offside Rear Passenger`s seat backrest cannot be secured in the upright position. |6.2.6 |a| |i||1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Nearside Headlamp not working on main beam |1.7.5a|1
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Rear Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))1
Offside Rear Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy