MOT History from tests of petrol CHRYSLER-JEEP NEONs year 2004

Review the list of common CHRYSLER-JEEP NEON failures below or to perform a specific mot history check on your CHRYSLER-JEEP then use our popular KnowYourCar service

mot history

Pass percent:74.16%

(The average a petrol CHRYSLER-JEEP NEON year 2004 passes without issue)

Based on:89 MOT Tests

Most common failures	No# failures
Registration plate issues	7
Anti-lock braking system warning lamp indicates an ABS fault	4
Headlamp aim out of alignment	3
Rear fog lamp not working \|1.3.2b\|	2
Rear fog lamp tell tale not working \|1.3.1b\|	2
Brakes imbalanced across an axle	2
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	2
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside front brake binding \|3.7.B.1\|	1
Nearside Track rod end has had excessive heat applied \|2.2.C.1e\|	1
Offside Track rod end has had excessive heat applied \|2.2.C.1e\|	1
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Front brake application uneven	1
front brakes release unevenly \|3.7.B.4\|	1
Centre Stop lamp not working \|1.2.1b\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Offside Front Side repeater not working (4.4.1 (a) (ii))	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Position lamp not working (4.2.1 (a) (ii))	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Offside Side repeater incorrect colour \|1.4.A.2f\|	1
Rear Rear fog lamp missing \|1.3.2a\|	1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Central Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	7
Anti-lock braking system warning lamp indicates an ABS fault	4
Headlamp aim out of alignment	3
Rear fog lamp not working \|1.3.2b\|	2
Rear fog lamp tell tale not working \|1.3.1b\|	2
Brakes imbalanced across an axle	2
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	2
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside front brake binding \|3.7.B.1\|	1
Nearside Track rod end has had excessive heat applied \|2.2.C.1e\|	1
Offside Track rod end has had excessive heat applied \|2.2.C.1e\|	1
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Front brake application uneven	1
front brakes release unevenly \|3.7.B.4\|	1
Centre Stop lamp not working \|1.2.1b\|	1
Offside Rear fog lamp not working \|1.3.2b\|	1
Offside Front Side repeater not working (4.4.1 (a) (ii))	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Position lamp not working (4.2.1 (a) (ii))	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Offside Side repeater incorrect colour \|1.4.A.2f\|	1
Rear Rear fog lamp missing \|1.3.2a\|	1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Central Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement \|2.4.G.2\|	1

MOT History from tests of petrol CHRYSLER-JEEP NEONs year 2004

Find us on Facebook