MOT History from tests of petrol CHEVROLET BLAZERs year 1987

Review the list of common CHEVROLET BLAZER failures below or to perform a specific mot history check on your CHEVROLET then use our popular KnowYourCar service

mot history

Pass percent:54.55%

(The average a petrol CHEVROLET BLAZER year 1987 passes without issue)

Based on:11 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	3
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Side repeater missing \|1.4.A.2b\|	1
Hazard warning switch missing \|1.4.B.1d\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	1
Exhaust emits excessive dense blue smoke during acceleration \|7.3.A.2c\|	1
Rear parking brake recording little or no effort	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Front brake application uneven	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Headlamp aim out of alignment	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Front Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear wheel bearing has excessive play \|2.6.2\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Rear Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brake pipe excessively corroded	3
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Side repeater missing \|1.4.A.2b\|	1
Hazard warning switch missing \|1.4.B.1d\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	1
Exhaust emits excessive dense blue smoke during acceleration \|7.3.A.2c\|	1
Rear parking brake recording little or no effort	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Front brake application uneven	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Headlamp aim out of alignment	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Front Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear wheel bearing has excessive play \|2.6.2\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Rear Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

MOT History from tests of petrol CHEVROLET BLAZERs year 1987

Find us on Facebook