Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Registration plate issues | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear Brake disc|s| cracked |3.2.A1g| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear reflector on motorcycle missing (1.4.1) | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
Rear Hydraulic brake control feels spongy (3.1.4a) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Registration plate lamp issues | 2 |
Headlamp aim not tested |1.6| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front suspension assembly component cracked |2.3.1| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear wheel spindle securing nut(s) loose (2.4.A.2b) | 1 |
Rear Brake disc(s) cracked (3.2.A1g) | 1 |
Front Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Centre Chain guard insecure (6.2.1c) | 1 |
Offside Front Direction indicator insecure (1.5.3b) | 1 |
Nearside Front Direction indicator insecure (1.5.3b) | 1 |
Stop lamp not working From any lever (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
An item not tested |Manual| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Stop lamp not working brake light not working from rear brake lever (4.3.1 (a) (ii)) | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Brake lagging in operation |1.2.1 |d|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Rear Chain guard fouling another component |6.2.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Offside Rear Brake master cylinder insecure master cylinder is insecure and moving around only 1 bolt in it |1.1.10 |c|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies not working front or rear brake controls |1.3.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear Brake Pedal |1.3.1a| | 1 |
Nearside Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Exhaust has part of the system missing |7.1.1a| | 1 |
Brake hose excessively kinked |3.2.B3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear position lamp does not face the rear reflector missing |1.1.1d| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Upper Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Headlamp not working on main beam headlight only working on dipped beam - PRS - fit new H4 Bulb (4.1.1 (a) (ii)) | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |