Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 7 |
Horn not working |1.7.3a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Centre Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |