| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 48 |
| Rear reflector on motorcycle missing |1.4.1| | 36 |
| Headlamp aim beam image kick up to the offside |1.6| | 32 |
| Drive chain excessively loose |6.2.1d| | 26 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 16 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Registration plate issues | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
| Horn not working |1.7.3a| | 13 |
| Front wheel bearings have excessive free play |2.3.5b| | 12 |
| Front wheel bearings are excessively rough |2.3.5b| | 12 |
| Stop lamp remains on when the brake is released |1.3.1e| | 11 |
| Drive chain worn to excess |6.2.1e| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Handlebar deformed |2.1.1b| | 7 |
| Fuel system component insecure |7.2.1b| | 7 |
| Indicator switch insecure |1.5.4| | 6 |
| Nearside Steering lock stop ineffective |2.1.3| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Offside Rear Footrest missing |6.2.1a| | 6 |
| Offside Steering lock stop ineffective |2.1.3| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Headlamp insecure |1.2.3b| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Front mudguard insecure |2.3.7| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 3 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Position lamp switch insecure |1.1.4b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Direction indicators not working |1.5.1c| | 2 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
| Registration plate lamp issues | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Handlebar grip missing |2.2.1 |d| |i|| | 2 |
| Fuel tank insecure |6.1.3 |a| |i|| | 2 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 2 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| An item not tested |Manual| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering lock stop maladjusted |2.1.3| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Central Front Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Nearside Headlamp insecure |1.2.3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Front Stop lamp affected by the operation of another lamp duller than tail light |1.3.2| | 1 |
| Rear Stop lamp affected by the operation of another lamp duller than tail light |1.3.2| | 1 |
| Fuel system component insecure fuel tank |7.2.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired no dip beam to test |1.2.3a| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Position lamp switch insecure (4.2.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Stop lamp not working foot control (4.3.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Brake pedal attachment screws loose |3.1.2b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain split link |6.2.1h| | 1 |
| Footrest missing Rear Passenger |6.2.1a| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Headlamp not working on dipped beam faulty switch (4.1.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Front Brake lever has restricted free movement hits throttle cable |1.1.15 |e|| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
| Rear Drive chain sprocket excessively loose all bolts loose |6.1.7 |c| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front mudguard can easily contact the wheel |2.3.7| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Rear reflector on motorcycle insecure |1.4.2c| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Front mudguard insecure |2.3.7| | 1 |
| Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Centre Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front switch at lever |1.3.1a| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |