MOT History from tests of petrol CAGIVA MITOs year 2000

Review the list of common CAGIVA MITO failures below or to perform a specific mot history check on your CAGIVA then use our popular KnowYourCar service

mot history

Pass percent:59.54%

(The average a petrol CAGIVA MITO year 2000 passes without issue)

Based on:1,347 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	74
Drive chain excessively loose \|6.2.1d\|	54
Headlamp aim beam image kick up to the offside \|1.6\|	49
Rear reflector on motorcycle missing \|1.4.1\|	49
Rear wheel bearings have excessive free play \|2.4.A.2c\|	41
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	38
Registration plate issues	35
Front wheel bearings have excessive free play \|2.3.5b\|	35
Horn not working \|1.7.3a\|	27
Front wheel bearings are excessively rough \|2.3.5b\|	25
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	25
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Drive chain worn to excess \|6.2.1e\|	22
Riders seat insecure \|6.2.1a\|	22
Offside Front Direction indicator not working \|1.5.1c\|	17
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	17
Steering headbearing has excessive free play \|2.2.2\|	17
Front Roller brake test indicates a binding brake \|3.3.A1a\|	14
Nearside Rear Direction indicator not working \|1.5.1c\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	12
Offside Front Direction indicators not working \|1.5.1c\|	12
Offside Rear Direction indicator not working \|1.5.1c\|	11
Nearside Rear Direction indicators not working \|1.5.1c\|	11
Stop lamp remains on when the brake is released \|1.3.1e\|	11
Nearside Rear Footrest missing \|6.2.1a\|	11
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	11
Brake hose damaged	10
Front Front wheel bearings have excessive free play \|2.3.5b\|	10
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	10
Rear Drive chain sprocket worn to excess \|6.2.1e\|	9
Rear suspension movement is excessively stiff \|2.4.A.3b\|	9
Rear Rear reflector on motorcycle missing \|1.4.1\|	8
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	8
Nearside Front Direction indicators not working \|1.5.1c\|	8
Rear Footrest missing \|6.2.1a\|	8
Drive chain excessively tight \|6.2.1d\|	7
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Front Front wheel bearings are excessively rough \|2.3.5b\|	6
Offside Handlebar deformed \|2.1.1b\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	6
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Direction indicators not working \|1.5.1c\|	6
Front Headlamp aim beam image kick up to the offside \|1.6\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	5
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	5
Rear Drive chain excessively loose \|6.2.1d\|	5
Rear Drive chain excessively tight \|6.2.1d\|	5
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	5
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	4
Fuel system component leaking \|7.2.1a\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	4
Offside Rear Direction indicators not working \|1.5.1c\|	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	4
Brake pedal cannot be released smoothly \|3.1.3d\|	4
Nearside Front Direction indicator missing \|1.5.1a\|	4
Front Floor brake test indicates a binding brake \|3.3.C2c\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Offside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	4
Direction indicator not working \|1.5.1c\|	4
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	4
Headlamp aim not tested \|1.6\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Direction indicator missing \|1.5.1a\|	3
Horn control defective \|1.7.2a\|	3
Rear Drive chain worn to excess \|6.2.1e\|	3
Footrest missing \|6.2.1a\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front position lamp incorrect colour \|1.1.2a\|	3
Indicator switch insecure \|1.5.4\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Offside Footrest missing \|6.2.1a\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	3
Rear wheel bearings are excessively rough \|2.4.A.2c\|	3
Rear Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	3
Horn not working (7.7 (a) (ii))	3
Chain guard insecure \|6.2.1c\|	3
Nearside Rear Direction indicator missing \|1.5.1a\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Direction indicator missing \|1.5.1a\|	3
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	3
Drive chain sprocket worn to excess \|6.2.1e\|	3
Rear Seat insecure \|6.2.1a\|	3
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Rear Stop lamp does not emit a steady light \|1.3.1b\|	3
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	3
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Rear Direction indicator missing \|1.5.1a\|	2
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Indicator tell tale not functioning \|1.5.2\|	2
Horn missing \|1.7.1\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Floor brake test indicates a severely juddering brake \|3.3C2d.\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Horn is not a constant note \|1.7.3c\|	2
Offside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Rear Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2
Offside Direction indicators not working \|1.5.1c\|	2
Nearside Direction indicators not working \|1.5.1c\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Front Direction indicator not working \|1.5.1c\|	2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Centre Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Centre Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Rear Drive chain excessively loose \|6.2.1d\|	2
Steering damper ineffective \|2.1.2d\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Nearside Handlebar deformed \|2.1.1b\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Horn control not functioning. \|1.7.2b\|	2
Offside Front Direction indicator missing \|1.5.1a\|	2
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	2
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Lower Steering headbearing has excessive free play \|2.2.2\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Front Direction indicators not working \|1.5.1c\|	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	74
Drive chain excessively loose \|6.2.1d\|	54
Headlamp aim beam image kick up to the offside \|1.6\|	49
Rear reflector on motorcycle missing \|1.4.1\|	49
Rear wheel bearings have excessive free play \|2.4.A.2c\|	41
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	38
Registration plate issues	35
Front wheel bearings have excessive free play \|2.3.5b\|	35
Horn not working \|1.7.3a\|	27
Front wheel bearings are excessively rough \|2.3.5b\|	25
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	25
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Drive chain worn to excess \|6.2.1e\|	22
Riders seat insecure \|6.2.1a\|	22
Offside Front Direction indicator not working \|1.5.1c\|	17
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	17
Steering headbearing has excessive free play \|2.2.2\|	17
Front Roller brake test indicates a binding brake \|3.3.A1a\|	14
Nearside Rear Direction indicator not working \|1.5.1c\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	12
Offside Front Direction indicators not working \|1.5.1c\|	12
Offside Rear Direction indicator not working \|1.5.1c\|	11
Nearside Rear Direction indicators not working \|1.5.1c\|	11
Stop lamp remains on when the brake is released \|1.3.1e\|	11
Nearside Rear Footrest missing \|6.2.1a\|	11
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	11
Brake hose damaged	10
Front Front wheel bearings have excessive free play \|2.3.5b\|	10
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	10
Rear Drive chain sprocket worn to excess \|6.2.1e\|	9
Rear suspension movement is excessively stiff \|2.4.A.3b\|	9
Rear Rear reflector on motorcycle missing \|1.4.1\|	8
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	8
Nearside Front Direction indicators not working \|1.5.1c\|	8
Rear Footrest missing \|6.2.1a\|	8
Drive chain excessively tight \|6.2.1d\|	7
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Throttle operating incorrectly \|6.2.1f\|	7
Front Front wheel bearings are excessively rough \|2.3.5b\|	6
Offside Handlebar deformed \|2.1.1b\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	6
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Direction indicators not working \|1.5.1c\|	6
Front Headlamp aim beam image kick up to the offside \|1.6\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	5
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	5
Rear Drive chain excessively loose \|6.2.1d\|	5
Rear Drive chain excessively tight \|6.2.1d\|	5
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	5
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	4
Fuel system component leaking \|7.2.1a\|	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	4
Offside Rear Direction indicators not working \|1.5.1c\|	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	4
Brake pedal cannot be released smoothly \|3.1.3d\|	4
Nearside Front Direction indicator missing \|1.5.1a\|	4
Front Floor brake test indicates a binding brake \|3.3.C2c\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Offside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	4
Direction indicator not working \|1.5.1c\|	4
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	4
Headlamp aim not tested \|1.6\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Direction indicator missing \|1.5.1a\|	3
Horn control defective \|1.7.2a\|	3
Rear Drive chain worn to excess \|6.2.1e\|	3
Footrest missing \|6.2.1a\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front position lamp incorrect colour \|1.1.2a\|	3
Indicator switch insecure \|1.5.4\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Offside Footrest missing \|6.2.1a\|	3
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	3
Rear wheel bearings are excessively rough \|2.4.A.2c\|	3
Rear Rear suspension movement is excessively stiff \|2.4.A.3b\|	3
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Headlamp not working on dipped beam (4.1.1 (a) (ii))	3
Horn not working (7.7 (a) (ii))	3
Chain guard insecure \|6.2.1c\|	3
Nearside Rear Direction indicator missing \|1.5.1a\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Direction indicator missing \|1.5.1a\|	3
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	3
Drive chain sprocket worn to excess \|6.2.1e\|	3
Rear Seat insecure \|6.2.1a\|	3
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Rear Stop lamp does not emit a steady light \|1.3.1b\|	3
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	3
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Rear Direction indicator missing \|1.5.1a\|	2
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Indicator tell tale not functioning \|1.5.2\|	2
Horn missing \|1.7.1\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Floor brake test indicates a severely juddering brake \|3.3C2d.\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Horn is not a constant note \|1.7.3c\|	2
Offside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Rear Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2
Offside Direction indicators not working \|1.5.1c\|	2
Nearside Direction indicators not working \|1.5.1c\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Front Direction indicator not working \|1.5.1c\|	2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	2
Centre Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Centre Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Rear Drive chain excessively loose \|6.2.1d\|	2
Steering damper ineffective \|2.1.2d\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Nearside Handlebar deformed \|2.1.1b\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Horn control not functioning. \|1.7.2b\|	2
Offside Front Direction indicator missing \|1.5.1a\|	2
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	2
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Lower Steering headbearing has excessive free play \|2.2.2\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Front Direction indicators not working \|1.5.1c\|	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	2

MOT History from tests of petrol CAGIVA MITOs year 2000

Find us on Facebook