Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 3 |
Horn not working |1.7.3a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Brake component is severely distorted |3.1.5| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Sidecar wheel alignment has excessive toe-out |5.3.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Brake component inadequately mounted torque arm |1.1.21 |c|| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Upper Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Lower An item not tested |Manual| | 1 |
Nearside Rear Lower An item not tested |Manual| | 1 |
Upper Riders seat insecure |6.2.1a| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Upper Headlamp insecure |1.2.3b| | 1 |
Front Upper Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front Upper Brake lever insecure |3.1.2a| | 1 |
Nearside Front Upper Brake lever mounting insecure |3.1.2a| | 1 |
Front Wheel spoke excessively bent |4.2.1b| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn missing |1.7.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on Does not illuminate. |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |