Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Horn not working |1.7.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Registration plate issues | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake locking device missing |3.2.A1e| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear wheel rotation likely to be impeded rear mudguard |6.2.1b| | 1 |
Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
An item not tested |Manual| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Central Upper Fuel system component leaking |7.2.1a| | 1 |