Most common failures | No# failures |
---|
Headlamp aim out of alignment | 47 |
Registration plate issues | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Horn not working |1.7.3a| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp insecure |1.2.3b| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Steering damper ineffective (2.1.4 (d) (i)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Steering damper ineffective |2.1.2d| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Seat insecure |6.2.1a| | 1 |
Outer Rear Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Front Steering lock stop missing |2.1.3| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Nearside Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working control 1 (4.3.1 (a) (ii)) | 1 |
Stop lamp not working control 2 (4.3.1 (a) (ii)) | 1 |
Front Front shock absorber seal failed and leaking oil left hand side fork leg leaking (2.3.3) | 1 |
Front position lamp does not illuminate immediately when switched on (1.1.3a) | 1 |
Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Direction indicator flashing more than 120 times per minute all four indicators flash too fast (1.5.1c) | 1 |
Offside Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Offside Rear Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp remains on when the brake is released (1.3.1e) | 1 |
Front position lamp incorrect colour (1.1.2a) | 1 |
Rear Brake caliper(s) insecure (3.2.A1j) | 1 |
Central Rear Stop lamp not working rear brake switch not operating light (4.3.1 (a) (ii)) | 1 |
Rear All position lamps do not illuminate immediately when switched on (1.1.3a) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Nearside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Rear suspension bearing has excessive free play (2.4.A2a(i)) | 1 |
Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Front Valve stem seriously damaged cracked (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged cracked (5.2.3 (j)) | 1 |
Stop lamp not working from front control (4.3.1 (a) (ii)) | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Rear Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Central Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Stop lamp not working Bulb fitted incorrectly. (4.3.1 (a) (ii)) | 1 |
Nearside Rear Brake lining(s) missing Pad lining detached (1.1.13 (c)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake fluid contaminated (1.8 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Throttle operating incorrectly Sticking (6.2.7 (a) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |