Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Horn not working |1.7.3a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 5 |
Stop lamp remains on when the brakes are released | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Registration plate lamp issues | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Steering damper ineffective |2.1.2d| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies inoperative from front lever |1.3.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake hose damaged | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp does not illuminate immediately a brake applies both front and rear brake lights |1.3.1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Front Brake disc|s| insecure loose rivets |3.2.A1g| | 1 |
Rear Brake hose which buldges |3.2.B4| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Throttle operating incorrectly no free play |6.2.1f| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear suspension bush has excessive free play rear swinging arm |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Brake component has restricted free movement and operation is likely to be impeded rear brake holding on |3.2.A1h| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp aim beam image kick up to the offside (1.6) | 1 |
Rear Suspension component has excessive wear or free play paralever bearings (5.3.3 (d)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Nearside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Nearside Front Brake hose leaking (1.1.12 (c)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front Brake lagging in operation (1.2.1 (d)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |