Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Stop lamp remains on when the brakes are released | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Registration plate issues | 8 |
Horn not working |1.7.3a| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Steering damper ineffective |2.1.2d| | 2 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Offside Front Upper Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn control defective |1.7.2a| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Brake disc|s| insecure |3.2.A1g| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Centre Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Stop lamp obscured |1.3.1c| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Rear Sidecar direction indicator obscured |1.5.1a| | 1 |
Sidecar rear position lamp obscured more than 50% |1.1.1d| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Steering damper ineffective |2.1.2d| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component ball joint loose |2.3.4| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Upper Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Central Front Fork yoke insecure |2.2.2 |d| |i|| | 1 |
Lower Front suspension assembly component loose ball joint on lower yoke |2.3.1| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake hose excessively deteriorated | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Steering damper ineffective leaking |2.1.4 |d| |i|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle operating incorrectly not returning and reving |6.2.7 |a| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front Brake lining(s) contaminated oil from fork seal (1.1.13 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak seal leaking (5.3.2 (b)) | 1 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Brake component insecure Retaining clip missing from left caliper (1.1.21 (c)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Brake master cylinder defective but brake still operating cylinder pumping up (1.1.10 (b) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Registration plate lamp issues | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Steering damper in such a condition that the steering action is adversely affected (2.1.4 (d) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Brake component inadequately mounted Brake caliper pin locking clip missing. (1.1.21 (c)) | 1 |