Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Horn not working |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Footrest missing |6.2.1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Registration plate issues | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Fuel pipe union leaking |7.2.1a| | 1 |
Offside Fuel pipe union leaking |7.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Steering lock stop missing |2.1.3| | 1 |
Offside Front Steering lock stop missing |2.1.3| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Horn replaced by a bell |1.7.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
An item not tested |Manual| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |