| Most common failures | No# failures |
|---|
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Headlamp aim out of alignment | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Horn not working |1.7.3a| | 2 |
| Front Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Fuel hose leaking |7.2.1a| | 1 |
| Offside Fuel hose leaking |7.2.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front suspension assembly component loose nearside fork pinch bolts at bottom loose. tightened up when tested. |2.3.1| | 1 |
| Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front Control |1.3.1a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Front Fuel system component insecure |7.2.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Brake hose leaking hose leaking at connection to master cylinder (1.1.12 (c)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Rear Wheel spindle locking device ineffective pinch bolt for spindle is loose (5.2.1 (d)) | 1 |
| Nearside Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Offside Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Brake performance unable to be tested not tested due to leaks on front flexi and calipers (1.2.1 (g)) | 1 |