Most common failures | No# failures |
---|
Headlamp aim out of alignment | 26 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Horn not working |1.7.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Brake hose damaged | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Centre Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Handlebar deformed control touching tank |2.1.1b| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Brake hose excessively kinked |3.2.B3a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Brake hose excessively deteriorated | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Brake lining|s| less than 1.5 mm thick Rear |3.2.A1f|i|| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn not loud enough to be heard by another road user cant be heard properly at higher speed /rpm |1.7.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear reflector on motorcycle missing replaced |1.4.1| | 1 |
Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Front Upper Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Centre Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Centre Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Handlebar handgrip not secure to handlebars. Handlebar grip on nearside rotates about handlebar |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies Brake light does not illuminate when rear brake applied |1.3.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Fuel system component leaking excessively or a risk of fire Carb (6.1.3 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Fuel cap ineffective seal split (6.1.3 (b) (i)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |