Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Registration plate issues | 3 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Position lamp switch faulty |1.1.4a| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Fuel cap sealing washer torn |7.2.2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Fuel system component leaking |7.2.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Sidecar wheel bearings are excessively rough |5.2.3d| | 1 |
Sidecar attachment insecure |5.1.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Nearside Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Handlebar mounting clamp loose (2.1.1a) | 1 |
Front Floor brake test indicates a binding brake (3.3.C2c) | 1 |
Direction indicators flashing more than 120 times per minute (1.5.1c) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |