Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Registration plate issues | 10 |
Horn not working |1.7.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Registration plate lamp issues | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Direction indicators not working all round |1.4.A.2c| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Rear Body insecure and dangerous to other road users mud guard insercure |6.1.B.1b| | 1 |
Front shock absorber leaking oil both |9.2.7b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid caliper |3.2.B1e| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front position lamp|s| not working sidelight |1.1.A.3b| | 1 |
Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Centre Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Rear parking brake recording little or no effort | 1 |
Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Parking brake efficiency below requirements |3.7.B.7| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Outer All direction indicators incorrect colour all indicaters showing white light (4.4.3 (a)) | 1 |
Stop lamp not working not working of rear brake (4.3.1 (a) (ii)) | 1 |