Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Throttle operating incorrectly |6.2.1f| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Registration plate issues | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Stop lamp remains on when the brakes are released | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Brake disc|s| insecure |3.2.A1g| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Brake pipe inadequately supported |3.2.B2b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Brake hose excessively deteriorated | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Nearside Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Offside Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake hose leaking |1.1.12 |c|| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Central Front Upper Position lamp not working side light bulb was blown |4.2.1 |a|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust mounting does not fully support the exhaust system silencer clamp loose |7.1.1.c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Central Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake hose which buldges |3.2.B4| | 1 |
All position lamps do not illuminate immediately when switched on Position lights go out on right hand lock. |1.1.3a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Motorcycle structure excessively damaged sub frame broke |6.1.1a| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid leaking on the seem and banjo bolt. |3.2.B1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Central Front Lower Front suspension assembly component loose |2.3.1| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Indicator switch defective cancel switch sticking |1.5.4| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake hose damaged | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Lower Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Handlebar fractured |2.1.1b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear suspension component loose Swinging arm support arm |2.4.A.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake component inadequately mounted fouling (1.1.21 (c)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |