Most common failures | No# failures |
---|
Headlamp aim out of alignment | 89 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 50 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 46 |
Stop lamp remains on when the brake is released |1.3.1e| | 36 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 34 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 30 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 29 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 28 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 28 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 19 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 18 |
Registration plate issues | 18 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 18 |
Horn not working |1.7.3a| | 15 |
Stop lamp remains on when the brakes are released | 13 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 12 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Front Brake excessively binding (1.2.1 (f)) | 9 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 7 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 7 |
Front Brake excessively binding |1.2.1 |f|| | 7 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
Front Brake lever cannot be released smoothly |3.1.3d| | 7 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Brake disc|s| excessively worn |3.2.A1l| | 6 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Rear Position lamp not working |4.2.1 |a|| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 5 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake excessively binding |1.2.1 |f|| | 4 |
Front Brake disc|s| insecure |3.2.A1g| | 4 |
Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Brake pipe excessively corroded | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front Brake hose leaking fluid |3.2.B4| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Horn not working |1.7.3a| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Brake performance not tested |3.3| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 3 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |