| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 38 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
| Registration plate issues | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Horn not working |1.7.3a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front position lamp missing |1.1.1a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Brake pipe excessively corroded | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Brake pipe inadequately supported |3.2.B2b| | 1 |
| Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Front suspension assembly component loose TOP YOKE |2.3.1| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake lever excessively corroded |3.2.A1c| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Brake component is excessively corroded |3.1.5| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Throttle operating incorrectly non - return, excessive play |6.2.1f| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort 5 - 6 bars |3.3.A1d| | 1 |
| Rear Roller brake test indicates a binding brake drum arm seized |3.3.A1a| | 1 |
| Throttle operating incorrectly not returning. notchy feel |6.2.1f| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Fuel system component leaking petrol tap |7.2.1a| | 1 |
| Rear wheel spindle securing nut locking device insecure bolt missing |2.4.A.2b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Offside Fuel hose leaking |7.2.1a| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Fuel cap sealing washer torn |7.2.2c| | 1 |
| Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Headlamp not working on dipped beam Fit new bulb (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
| Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Front Brake hose leaking (1.1.12 (c)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |