| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 138 |
| Registration plate issues | 15 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 8 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Horn not working |1.7.3a| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Front Brake excessively binding |1.2.1 |f|| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Brake excessively binding |1.2.1 |f|| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Wheel spoke excessively loose |4.2.1b| | 2 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Headlamp light source and lamp not compatible |4.1.4 |c|| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Dip bulb not fitted correctly |1.6.B.1| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc|s| excessively worn both front discs worn |3.2.A1l| | 1 |
| Rear Direction indicator incorrect colour showing white light |1.5.1b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded Front brake calipers are expensive corroded |3.2.A1h| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Fuel system component insecure L/H rear tank bolt digging into tank as spacer and washers are missing - likely to puncture tank and cause fuel leak |7.2.1b| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Central Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Offside Footrest insecure |6.2.12 |a|| | 1 |
| Exhaust has part of the system missing baffle |7.1.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake excessively binding front |1.2.1 |f|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Bulb incorrectly fitted, spring clip missing |4.1.2 |a|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Front position lamp insecure |1.1.1c| | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component ball joint boot torn |2.3.4| | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Steering linkage ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt front ball joint cover detached at top |2.1.3 |g| |ii|| | 1 |
| Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
| Front Front shock absorber seal failed and leaking oil Front shock ; Severe oil leak , no damping evident. |2.3.3| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Central Front Upper Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Central Front Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust has part of the system missing baffle missing |7.1.1a| | 1 |
| Front shock absorber seal failed and leaking oil r/h |2.3.3| | 1 |
| Front shock absorber seal failed and leaking oil l/h |2.3.3| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Horn missing |1.7.1| | 1 |
| Suspension rod pin or bush excessively worn Excessive play on sidecar suspension rods |5.3.4 |a| |i|| | 1 |
| Sidecar wheel bearings have excessive free play Hub pivot loose |5.2.3c| | 1 |
| Sidecar wheel bearings have excessive free play Upper link to rod to hub nut loose |5.2.3c| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Steering linkage ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn final drive to swing arm bearing (5.3.4 (a) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |