Most common failures | No# failures |
---|
Headlamp aim out of alignment | 123 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Horn not working |1.7.3a| | 10 |
Registration plate issues | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Headlamp switch faulty |1.2.4| | 5 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Steering linkage ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Central Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Sidecar wheel bearings have excessive free play |5.2.3c| | 2 |
Sidecar wheel bearings are excessively rough |5.2.3d| | 2 |
Floor brake test indicates a binding brake FRONT CALIPERS SEIZED |3.3.C2c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort slight pulse of front brake lever when brake applied |3.3.A1d| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp aim not tested Bulb not working |1.6| | 1 |
Rear Brake disc|s| excessively worn REAR BRAKE DISC 1.0MM BELOW MINIMUM THICKNESS |3.2.A1l| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Front Upper Headlamp switch faulty |1.2.4| | 1 |
Front Hydraulic brake control feels spongy o/s front pads looks contaminated |3.1.4a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen no beam pattern visible to test |1.6.B.1| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake performance not tested |3.3| | 1 |
Direction indicators not working FRONT AND REAR OFFSIDE |1.5.1c| | 1 |
Front Brake cylinder has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake fluid reservoir severely corroded |3.2.B1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Footrest insecure
Footrest pin not secured |6.2.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Brake master cylinder leaking hydraulic fluid front brake master cylinder leaking fluid |3.2.B1e| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear reflector reflecting white to the rear |4.8.2 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Central Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp not working rear switch |4.3.1 |a| |ii|| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear suspension bearing has excessive free play swinging arm |2.4.A2a|i|| | 1 |
Nearside Direction indicators not working both l/h indicators inop |1.5.1c| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Headlamp light intensity severely reduced dipped beam |4.1.4 |a|| | 1 |
Offside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Steering linkage ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Wheel excessively distorted nearside of rim of front wheel distorted (5.2.2 (c) (i)) | 1 |
Steering headbearing has excessive wear or free play head set (2.2.2 (f) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |