Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 6 |
Headlamp aim out of alignment | 3 |
Rear brake binding | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Brakes imbalanced across an axle | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
Rear fog lamp switch missing |4.5.3 |a| |ii|| | 1 |
Anti-lock braking system warning lamp does not illuminate |1.6 |a|| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Nearside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 1 |
Rear Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Mechanical brake component has restricted free movement | 1 |
Emissions not tested |7.0| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Front Brake has no servo assistance |3.3.B.2| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |