>

MOT History from tests of petrol BMW K75s year 1989

Review the list of common BMW K75 failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history
Pass percent:87.02%
(The average a petrol BMW K75 year 1989 passes without issue)
Based on:1,525 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment46
Horn not working |1.7.3a|14
Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Headlamp insecure |1.2.3b|5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|5
Front Brake lever has inadequate reserve travel |3.1.3b|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Headlamp aim beam image kick up to the offside |1.6|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Front shock absorber seal failed and leaking oil |2.3.3|4
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|3
Rear shock absorber seal failed and leaking oil |2.4.A.1c|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Throttle operating incorrectly |6.2.1f|3
Front Wheel has an excessively distorted bead rim. |4.2.2|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Brake disc|s| is excessively distorted |3.2.A1m|3
Rear Wheel has an excessively distorted bead rim. |4.2.2|2
Front Brake disc|s| excessively worn |3.2.A1l|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Horn not working (7.7 (a) (ii))2
Horn not working |7.7 |a| |ii||2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Rear Brake disc|s| has excessive run out |3.2.A1m|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Fuel hose leaking |7.2.1a|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Nearside Steering lock stop ineffective |2.1.3|2
Front Headlamp aim beam image kick-up is to the offside |1.6.1|2
Brake pipe excessively corroded2
Registration plate issues2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear Brake lever excessively corroded |3.2.A1c|2
Riders seat insecure |6.2.1a|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Offside Front Direction indicators not working |1.5.1c|2
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear Wheel has an excessively eccentric bead rim. |4.2.2|1
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Offside Front Steering lock stop ineffective |2.1.3|1
Brake disc|s| has excessive run out |3.2.A1m|1
Horn not working (7.7 (a))1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front position lamp insecure |1.1.1c|1
Offside Front Brake disc|s| cracked |3.2.A1g|1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
All position lamps not working |4.2.1 |a||1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Steering headbearing has excessive free play |2.2.2|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear reflector missing |4.8.2 |a| |ii||1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Brake disc|s| is excessively distorted |3.2.A1m|1
Front Headlamp insecure |1.2.3b|1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Rear Brake component is excessively corroded |3.1.5|1
Nearside Direction indicator not working |1.5.1c|1
Stop lamp remains on when the brake is released |1.3.1e|1
Offside Steering lock stop ineffective |2.1.3|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Headlamp insecure |4.1.1 |c||1
Headlamp aim so that beam "kick up" is not visible on the screen kick up to right (4.1.2 (a))1
Brake component is excessively corroded |3.1.5|1
Nearside Front Brake component cracked and seriously reduced in strength |3.2.A1|1
Rear Valve stem seriously damaged |5.2.3 |j||1
Offside Rear Footrest insecure SPLIT PIN MISSING |6.2.12 |a||1
Brake pedal cannot be applied smoothly |3.1.3d|1
Brake pedal mounting cracked . |3.1.2c|1
Brake hose excessively deteriorated1
Rear Brake master cylinder severely corroded |3.2.B1b|1
Rear shock absorber insecurely mounted |2.4.A.3b|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock Full LH steering lock engine idle "hangs" up. |2.1.4|1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Brake disc|s| cracked |3.2.A1g|1
Brake hose damaged1
Front Horn not working |1.7.3a|1
Headlamp aim not tested |1.6|1
Rear Brake cylinder leaking (1.1.16 (b) (i))1
Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Nearside Steering lock stop maladjusted |2.1.3|1
Rear Brake disc|s| excessively pitted |3.2.A1l|1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Stop lamp remains on when the brakes are released1
Nearside Brake disc|s| excessively worn |3.2.A1l|1
Offside Brake disc|s| excessively worn |3.2.A1l|1
Front Steering lock stop maladjusted |2.1.3|1
Nearside Front Front suspension has inadequate damping effect. |2.3.6c|1
Offside Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Valve stem seriously damaged |5.2.3 |j||1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride left hand side rear peg split pin missing |6.2.1h|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Steering lock stop ineffective |2.1.3|1
Fuel system component insecure |7.2.1b|1
Offside Front Brake master cylinder leaking (1.1.10 (b) (ii))1
Rear reflector on motorcycle missing |1.4.1|1
Riders seat insecure |6.2.5 |a| |ii||1
Throttle operating incorrectly |6.2.7 |a| |i||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front Brake disc|s| securing bolt|s| loose |3.2.A1g|1
Direction indicators flashing less than 60 times a minute |1.5.1c|1
Nearside Front Wheel fixing missing |multiple fixings| pinch bolt |5.2.1 |a| |i||1
Nearside Lower Fuel tank leaking |7.2.1a|1
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))1
Front Brake disc|s| cracked |3.2.A1g|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Nearside Front Direction indicators not working |1.5.1c|1
Rear Brake disc contaminated (1.1.14 (b))1
Nearside Front Direction indicator not working |1.5.1c|1
Offside Rear Upper Stop lamp remains on when the brake is released |1.3.1e|1
Offside Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Rear Lower Brake linkage has abnormal movement due to maladjustment |3.2.A1i|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Offside Rear Direction indicator not working |1.5.1c|1
Rear Direction indicators not working |1.5.1c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Brake hose leaking fluid |3.2.B4|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Upper Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy