Most common failures | No# failures |
---|
Headlamp aim out of alignment | 55 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Horn not working |1.7.3a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Registration plate issues | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Fuel tank leaking |7.2.1a| | 4 |
Front Horn not working |1.7.3a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake lever excessively corroded |3.2.A1c| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Outer Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Lower Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Forks in such a condition that steering control is adversely affected |2.2.2 |d| |ii|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
All direction indicators missing all |4.4.1 |a| |ii|| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Exhaust has a major leak of exhaust gases rear silencer loose on front pipe (6.1.2 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake caliper leaking heavy leakage from caliper onto disk and pads (1.1.16 (b) (i)) | 1 |
Rear Brake disc contaminated heavy contamination from caliper (1.1.14 (b)) | 1 |
Rear Stop lamp not working brake light does not operate from either front or back controls (4.3.1 (a) (ii)) | 1 |
Rear Motorcycle structure is deformed and structural rigidity is significantly reduced frame cut rear of seat over 70% diameter of frame likely to crack and fail needs welding asap. (6.1.1 (a) (i)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Nearside Front Brake hose fouling |3.2.B3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Horn not working (7.7 (a)) | 1 |
Centre Front Motorcycle structure cracked |6.1.1a| | 1 |
Centre Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake master cylinder severely damaged |3.2.B1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Gradient brake test indicates a severely juddering brake |3.3.D1d| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Sidecar wheel bearings have excessive free play |5.2.3c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Brake hose damaged | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Front Shock absorber has a serious fluid leak Fork leg (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling wheel rubbing on swinging arm |2.4 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
An item not tested |Manual| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Fuel tank leaking |7.2.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Brake master cylinder leaking REAR CAP SEAL |1.1.10 |b| |ii|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake lining|s| less than 1.5 mm thick Rear pads bellow legal requirement |3.2.A1f|i|| | 1 |
Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Upper Rear position lamp insecure |1.1.1c| | 1 |
Centre Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Offside Front Fuel tank leaking |7.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Brake component is excessively corroded |3.1.5| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake component cracked and seriously reduced in strength Rear brake cam lever |3.2.A1| | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear shock absorber insecurely mounted top eye snapped |2.4.A.3b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |