>

MOT History from tests of petrol BMW K75s year 1987

Review the list of common BMW K75 failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history
Pass percent:86.40%
(The average a petrol BMW K75 year 1987 passes without issue)
Based on:1,721 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment52
Registration plate issues9
Horn not working |1.7.3a|9
Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear reflector on motorcycle missing |1.4.1|7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear shock absorber has inadequate damping effect. |2.4.A.3b|6
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|5
Front Roller brake test indicates a binding brake |3.3.A1a|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Headlamp insecure |1.2.3b|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Stop lamp remains on when the brakes are released4
Steering headbearing has excessive free play |2.2.2|4
Steering movement excessively stiff with the wheel raised |2.2.1b|4
Front Horn not working |1.7.3a|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Throttle operating incorrectly |6.2.1f|3
Stop lamp remains on when the brake is released |1.3.1e|3
Front Stop lamp not working (4.3.1 (a) (ii))3
Horn not working (7.7 (a))3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|3
Brake lever has inadequate reserve travel |3.1.3b|2
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))2
Fuel cap ineffective (6.1.3 (b) (i))2
Riders seat insecure |6.2.1a|2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|2
Brake hose damaged2
Nearside Front Brake disc|s| excessively worn |3.2.A1l|2
Front Horn not working (7.7 (a))2
Rear All direction indicators not working (4.4.1 (a) (ii))2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Front Position lamp not working (4.2.1 (a))2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear reflector missing |4.8.2 |a| |ii||2
Fuel tank leaking |7.2.1a|2
Rear Rear reflector missing (4.8.2 (a) (ii))2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Brake disc|s| is excessively distorted |3.2.A1m|2
Offside Headlamp insecure |1.2.3b|2
Brake pedal cracked |3.1.2c|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Brake pipe excessively corroded2
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Headlamp deteriorated and function impaired |1.2.3a|1
Headlamp aim projected beam image obviously incorrect Flick up to right (4.1.2 (c))1
Brake pedal has insufficient reserve travel (1.1.2 (a))1
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear position lamp insecure |1.1.1c|1
Front wheel spindle loose securing bolts loose and missing |2.3.3a|1
Offside Front Brake disc fractured |1.1.14 |a| |ii||1
Stop lamp does not illuminate immediately a brake applies on sidecar |1.3.1a|1
Nearside Front Direction indicator light intensity significantly reduced |4.4.3 |a||1
Brake excessively binding |1.2.1 |f||1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Headlamp aim beam image kick-up is to the offside |1.6.1|1
Centre Front Rear reflector on motorcycle missing |1.4.1|1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Centre Front Direction indicator not working |1.5.1c|1
Centre Front Brake lever is inoperative |3.1.3c|1
Headlamp damaged and function impaired |1.2.3a|1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Offside Front Shock absorber has a serious fluid leak O/s fork seal leaking oil (5.3.2 (b))1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Nearside Front Fuel system component leaking |6.1.3 |b| |i||1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride axle bolt |6.2.1h|1
Front Steering lock stop missing |2.1.3|1
Front Steering lock stop ineffective |2.1.3|1
Front Fairings so located that it is likely to impede the steering |2.1.2e|1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear Brake fluid contaminated |1.8 |a||1
Brake performance not tested |1.2.1 |g||1
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5|1
Rear Brake performance not tested |3.3|1
Front Brake disc|s| excessively pitted |3.2.A1l|1
Rear position lamp deteriorated and function impaired |1.1.1b|1
Front Brake master cylinder severely corroded |3.2.B1b|1
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Riders seat insecure |6.2.1a|1
Offside Rear Direction indicator not working |1.5.1c|1
Stop lamp adversely affected by the operation of another lamp tail lamp and stop lamp incorrectly wired (4.3.3 (b))1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Brake excessively binding (1.2.1 (f))1
Nearside Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering Clutch Lever Fouling Fairing on Full Right Hand Lock Test (6.1.1 (a) (ii))1
Offside Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering Brake Lever Fouling Fairing on Full Left Hand Lock Test - Brake Lever Also Bent (6.1.1 (a) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle Doesnt return to Idle Speed Position as it should after Operation (6.2.7 (a) (ii))1
Horn not working (7.7 (a) (ii))1
Headlamp aim so that beam "kick up" is not visible on the screen Requires Adjustment (4.1.2 (a))1
Rear Brake excessively binding (1.2.1 (f))1
Rear Valve stem seriously damaged Rubber perished. |5.2.3 |j||1
Front Valve stem seriously damaged (5.2.3 (j))1
Offside Direction indicator not working |1.5.1c|1
Front Brake hose excessively kinked |3.2.B3a|1
Front wheel bearings are excessively rough |2.3.5b|1
All direction indicators not working fuse blown |4.4.1 |a| |ii||1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Offside Front Brake disc|s| excessively worn |3.2.A1l|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Brake hose leaking fluid |3.2.B4|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Throttle operating incorrectly (6.2.7 (a) (i))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))1
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Rear Brake drum|s| securing bolt|s| loose |3.2.A1g|1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Offside Front Brake disc contaminated fork oil on disc (1.1.14 (b))1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Shock absorber insecurely attached Rear shock absorber - top bolt loose (5.3.2 (a) (i))1
Headlamp insecure Loose on mounting bolts (4.1.1 (c))1
Nearside Rear Direction indicator not working |1.4.A.2c|1
Offside Rear Direction indicator not working |1.4.A.2c|1
Front Shock absorber has negligible damping effect |2.7.5|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Offside rear brake recording little or no effort |3.7.B.5a|1
Brake pedal actuating lever has abnormal movement indicating maladjustment or excessive wear |3.3.A.1h|1
Rear Brake component cracked and seriously reduced in strength |3.2.A1|1
Direction indicator not working |1.5.1c|1
Front Throttle operating incorrectly |6.2.1f|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Outer Indicator tell tale not functioning |1.5.2|1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Front Headlamp incorrect colour |1.2.1|1
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Front wheel bearings have excessive free play |2.3.5b|1
Offside Front Brake caliper insecurely mounted and braking performance affected Upper mounting bolt missing lower mounting bolt loose (1.1.16 (c) (ii))1
Nearside Front Brake caliper insecure Both mounting bolts loose (1.1.16 (c) (i))1
Rear Brake rod excessively damaged |3.2.A1c|1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Brake component worn and seriously reduced in strength |3.2.A1|1
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected Lens cracked, showing white light (4.4.1 (b) (ii))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Direction indicators not working |1.5.1c|1
Front Direction indicator obviously incorrectly positioned Indicators too close together, law requires 240mm distance between indicators. (4.4.3 (a))1
Offside Front Shock absorber has a serious fluid leak Leaking fluid, stantion heavily scored by bush. (5.3.2 (b))1
Front Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii||1
Rear reflector on sidecar dirty and function impaired |1.4.2a|1
Nearside Rear Footrest insecure |6.2.12 |a||1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Brake component is excessively corroded |3.1.5|1
Front Brake pipe union leaking fluid |3.2.B4|1
Front Horn not working |7.7 |a| |ii||1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Indicator tell tale not operating correctly |1.5.2|1
Direction indicator flashing more than 120 times per minute |1.5.1c|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Stop lamp adversely affected by the operation of another lamp |4.3.3 |b||1
Stop lamp not working |4.3.1 |a| |ii||1
Headlamp not working on dipped beam faulty high/low beam switch intermittently interrupting headlights. |4.1.1 |a| |ii||1
Registration plate lamp issues1
Stop lamp remains on when the brake is released front switch |1.3.1e|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Rear Brake lever excessively corroded |3.2.A1c|1
Rear Brake pedal is inoperative |3.1.3c|1
Riders seat insecure (6.2.5 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy