Most common failures | No# failures |
---|
Headlamp aim out of alignment | 44 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Horn not working |1.7.3a| | 9 |
Throttle operating incorrectly |6.2.1f| | 8 |
Riders seat insecure |6.2.1a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Registration plate issues | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 4 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Riders seat insecure |6.2.1a| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn control defective |1.7.2a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Fuel tank leaking |7.2.1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings are excessively tight |2.3.5b| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn not working (7.7 (a)) | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Central Front Upper Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Upper Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Central Front Headlamp at least one does not illuminate on dipped beam dipped head light switch broken up inside |1.2.2a|i|| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear All direction indicators not working rear indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp not working Lamp not illuminating when front or rear brake applied. |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Headlamp switch faulty |1.2.4| | 1 |
Centre Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Forks excessively deformed (2.2.2 (d) (i)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Rear wheel spindle loose |2.4.A.2b| | 1 |
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Brake linkage excessively damaged |3.2.A1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Brake linkage excessively worn Rear brake actuator arm broken (1.1.15 (b)) | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Lower Front suspension assembly component cracked |2.3.1| | 1 |
Rear Wheel fixing missing |multiple fixings| |5.2.1 |a| |i|| | 1 |
Stop lamp not working Front Control (4.3.1 (a) (ii)) | 1 |
Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Brake lever excessively corroded |3.2.A1c| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |