>

MOT History from tests of petrol BMW K1200s year 2002

Review the list of common BMW K1200 failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history
Pass percent:92.49%
(The average a petrol BMW K1200 year 2002 passes without issue)
Based on:2,861 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment41
Nearside Front shock absorber seal failed and leaking oil |2.3.3|11
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Registration plate issues10
Offside Front shock absorber seal failed and leaking oil |2.3.3|9
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Registration plate lamp issues5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|5
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|4
Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Rear suspension bearing has excessive free play |2.4.A2a|i||4
Rear wheel bearings have excessive free play |2.4.A.2c|3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Offside Front Brake disc|s| insecure |3.2.A1g|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Nearside Rear Direction indicators not working |1.5.1c|3
Headlamp aim beam image kick up to the offside |1.6|2
Horn not working |1.7.3a|2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Front wheel bearings have excessive free play |2.3.5b|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Front Decelerometer brake test indicates a binding brake |3.3.E1d|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Nearside Front Direction indicators not working |1.5.1c|1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Rear Brake disc|s| cracked |3.2.A1g|1
Offside Front Direction indicators not working |1.5.1c|1
Wheel bearing has excessive play front |5.1.3 |a| |i||1
Offside Front Front wheel spindle securing nut locking device missing |2.3.3a|1
Nearside Front Shock absorber has a serious fluid leak fork |5.3.2 |b||1
Horn not working (7.7 (a) (ii))1
Front Brake excessively binding (1.2.1 (f))1
Brake master cylinder fluid level dangerously low |3.2.B1d|1
Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Rear Footrest insecure |6.2.1a|1
Nearside Front Direction indicator obscured |1.5.1a|1
Handlebar mounting clamp loose |2.1.1a|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Brake hose leaking fluid |3.2.B4|1
Front Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Headlamp main beam flickers when tapped lightly by hand |1.2.2c|1
Front Steering damper ineffective |2.1.2d|1
Rear reflector on motorcycle missing |1.4.1|1
Offside Front Footrest insecure |6.2.1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Direction indicators not working |1.5.1c|1
Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i||1
Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Nearside Front Footrest insecure |6.2.12 |a||1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Front wheel spindle securing nut|s| loose |2.3.3a|1
Front wheel spindle loose |2.3.3a|1
Stop lamp remains on when the brake is released |1.3.1e|1
Offside Rear Direction indicator insecure |1.5.3b|1
Front mudguard insecure |2.3.7|1
Offside Rear Brake disc|s| has excessive run out |3.2.A1m|1
Rear Brake fluid not visible |1.1.10 |d| |iii||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Offside Indicator tell tale not functioning |1.5.2|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Front Footrest insecure |6.2.1a|1
Steering linkage ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Brake hose excessively stretched from master cylinder on l/h lock |1.1.12 |b| |ii||1
Offside Front Brake hose excessively stretched |1.1.12 |b| |ii||1
Front Brake hose excessively kinked |3.2.B3a|1
Centre Front Horn not working |1.7.3a|1
Rear wheel has a loose wheel bolt|s| |4.2.3a|1
Rear wheel has a missing wheel bolt|s| |4.2.3a|1
Riders seat insecure |6.2.1a|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Nearside Front Direction indicator light intensity significantly reduced |4.4.3 |a||1
Offside Rear Footrest insecure |6.2.12 |a||1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Rear Brake performance not tested |3.3|1
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii||1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Stop lamp remains on when the brakes are released1
Front Brake disc|s| insecure |3.2.A1g|1
Offside Front Direction indicator not working |4.4.1 |a| |ii||1
Front Decelerometer brake test indicates a severely grabbing brake |3.3.E1e|1
Rear Decelerometer brake test indicates a severely grabbing brake |3.3.E1e|1
Rear Decelerometer brake test indicates a binding brake |3.3.E1d|1
Braking system does not have an approriate system/s fitted according to its age |3.1.1|1
Front Position lamp not working |4.2.1 |a||1
Shock absorber has a serious fluid leak n/s & o/s |5.3.2 |b||1
Front Brake excessively binding |1.2.1 |f||1
Nearside Rear Indicator tell tale not functioning |1.5.2|1
Nearside Indicator tell tale not functioning |1.5.2|1
Nearside Front Floor brake test indicates a binding brake |3.3.C2c|1
Offside Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear Brake hose which buldges |3.2.B4|1
Brake hose excessively deteriorated1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Riders seat insecure |6.2.5 |a| |ii||1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Brake fluid contaminated |1.8 |a||1
Nearside Steering lock stop missing |2.1.3|1
Front Steering lock stop ineffective |2.1.3|1
Brake pedal mounting cracked . |3.1.2c|1
Brake performance not tested |3.3|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Brake lever has inadequate reserve travel |3.1.3b|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear suspension bearing has excessive free play bevel gear paralever bearings |2.4.A2a|i||1
Rear Brake disc|s| insecure |3.2.A1g|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Fuel cap sealing washer missing |7.2.2c|1
Front Steering damper in such a condition that the steering action is impaired. |2.1.2d|1
Offside Upper An item not tested |Manual|1
Offside Lower An item not tested |Manual|1
Centre Lower An item not tested |Manual|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Steering headbearing has excessive free play |2.2.2|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy