Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Registration plate issues | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Registration plate lamp issues | 3 |
Steering damper ineffective |2.1.2d| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Front Steering damper ineffective |2.1.2d| | 3 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Front Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake hose which buldges |3.2.B4| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mirror |6.1.1c| | 1 |
Nearside Front Brake disc|s| insecure brake disc |3.2.A1g| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Brake performance not tested Brakes not tested using decelerometer due to brake failure warning lamp remaining illuminated during test. |1.2.1 |g|| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Central Rear Lower Stop lamp does not illuminate immediately a brake applies rear brake light does not come on |1.3.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Shock absorber has a serious fluid leak front right seal leaking |5.3.2 |b|| | 1 |
Throttle operating incorrectly Throttle requires force to close fully. |6.2.1f| | 1 |
Offside Rear Rear suspension component loose Final drive pivot bearings , excessive play evident |2.4.A.1a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Steering damper ineffective |2.1.4 |d| |i|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Upper Direction indicators not working |1.5.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake disc|s| excessively worn Excessive play in rivets |3.2.A1l| | 1 |
Offside Front Brake disc insecure Spring washers missing from securing bolts |1.1.14 |a| |ii|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Upper Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Upper An item not tested |Manual| | 1 |
Nearside Lower An item not tested |Manual| | 1 |
Inner Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Outer Front Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Lower Brake hose which buldges |3.2.B4| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure also cracked |6.2.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil leaking oil onto front nearside Caliper |2.3.3| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Centre Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Headlamp light source and lamp not compatible HID Light fitted with STD headlight lens |4.1.4 |c|| | 1 |
Front Brake fluid contaminated Front brake fluid contaminated & very close to min fluid level mark. |1.8 |a|| | 1 |
Front Lower Steering linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt Lower Ball joint ; Rubber protective rubber boot split , joint exposed. |2.1.3 |g| |ii|| | 1 |
Rear Wheel bearing rough when rotated Crown wheel bearing "rough" when wheel rotated. |5.1.3 |b| |i|| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake locking device insecure one brake caliper retaining bolt loose |3.2.A1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |