>

MOT History from tests of petrol BMW K1200s year 1998

Review the list of common BMW K1200 failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history
Pass percent:87.38%
(The average a petrol BMW K1200 year 1998 passes without issue)
Based on:1,901 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment20
Front Roller brake test indicates a binding brake |3.3.A1a|10
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Registration plate issues10
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|9
Front position lamp does not illuminate immediately when switched on |1.1.3a|8
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|7
Throttle operating incorrectly |6.2.1f|7
Offside Front shock absorber seal failed and leaking oil |2.3.3|7
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Offside Front Direction indicator not working |1.5.1c|6
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Nearside Front Footrest insecure |6.2.1a|5
Rear suspension bearing has excessive free play |2.4.A2a|i||5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|5
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|4
Rear Brake pedal has inadequate reserve travel |3.1.3b|4
Registration plate lamp issues4
Front Brake lever has inadequate reserve travel |3.1.3b|4
Front Roller brake test indicates a severely juddering brake |3.3.A1b|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Exhaust is leaking and excessively noisey |7.1.1b|4
Horn not working |1.7.3a|4
Steering damper ineffective |2.1.2d|4
Rear Brake disc|s| has excessive run out |3.2.A1m|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Rear Hydraulic brake control feels spongy |3.1.4a|3
Front Wheel has an excessively distorted bead rim. |4.2.2|3
Stop lamp remains on when the brake is released |1.3.1e|3
Offside Handlebar mounting clamp bolt loose |2.1.1a|2
Front Hydraulic brake control feels spongy |3.1.4a|2
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front Brake pipe inadequately supported |3.2.B2b|2
Rear Brake hose leaking fluid |3.2.B4|2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Headlamp aim not tested |1.6|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|2
Rear Position lamp not working |4.2.1 |a||2
Nearside Front Direction indicators not working |1.5.1c|2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Offside Front Footrest insecure |6.2.1a|2
Front brake disc in such a condition that it is seriously weakened2
Front Brake disc|s| insecure |3.2.A1g|2
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|2
Offside Front Brake disc|s| insecure |3.2.A1g|2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Rear reflector on motorcycle missing |1.4.1|2
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Nearside Rear Direction indicators not working |1.5.1c|1
Offside Front Brake hose which buldges |3.2.B4|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Steering damper ineffective |2.1.4 |d| |i||1
Front Steering damper in such a condition that the steering action is impaired. steering damper leaking fluid |2.1.2d|1
Nearside Front Direction indicator not working |1.5.1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear Brake excessively binding |1.2.1 |f||1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Rear Hydraulic brake control creeps under load. |3.1.4a|1
Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Throttle operating incorrectly |6.2.1f|1
Offside Rear Lower Brake hose leaking fluid |3.2.B4|1
Nearside Steering lock stop ineffective |2.1.3|1
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Front position lamp insecure |1.1.1c|1
Offside Front Upper Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Brake disc|s| insecure |3.2.A1g|1
Front Steering linkage component insecure fork brace loose and bolt missing |2.1.3 |a| |i||1
Nearside Front Brake hose leaking fluid |3.2.B4|1
Nearside Front Brake hose which buldges |3.2.B4|1
Front Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Direction indicator incorrect colour |1.5.1b|1
Rear Direction indicator incorrect colour |1.5.1b|1
Offside Front Brake component has restricted free movement and operation is likely to be impeded outer disc pad seized not making contact with disc when brake applied. |3.2.A1h|1
Offside Front Upper Brake hose leaking |1.1.12 |c||1
Brake performance not tested brake hose pin holed |1.2.1 |g||1
Stop lamp not working |4.3.1 |a| |ii||1
Nearside Front Footrest insecure |6.2.12 |a||1
Offside Front Direction indicators not working |1.5.1c|1
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Nearside Handlebar mounting clamp bolt loose |2.1.1a|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake disc fractured |1.1.14 |a| |ii||1
Offside Front Footrest insecure footrest cracked half way through |6.2.1a|1
Front Steering damper ineffective |2.1.2d|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Rear suspension component loose |2.4.A.1a|1
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Front Direction indicator insecure |1.5.3b|1
Brake hose damaged1
Direction indicator not working |1.5.1c|1
Steering linkage has excessive free play |2.2.2|1
Rear Brake fluid reservoir insecurely mounted |3.2.B1a|1
Horn not working |7.7 |a| |ii||1
Throttle operating incorrectly |6.2.7 |a| |i||1
Front Brake excessively binding |1.2.1 |f||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Nearside Handlebar fouling on the fuel tank or bodywork on full lock traps hand |2.1.4 |b||1
Front Horn not working |1.7.3a|1
Nearside Footrest insecure |6.2.1a|1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front Brake master cylinder severely damaged |3.2.B1b|1
Front Stop lamp damaged and function impaired |1.3.3a|1
Central Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Front Direction indicator not working |1.5.1c|1
Rear Brake master cylinder insecurely mounted |3.2.B1a|1
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Stop lamp remains on when the brakes are released1
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Exhaust mounting missing |7.1.1c|1
Rear reflector on motorcycle obscured |1.4.1|1
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Brake master cylinder fluid level dangerously low |3.2.B1d|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Front Upper Fairing so located that it is likely to impede the steering |2.1.2e|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Front Horn not loud enough to be heard by another road user |1.7.3a|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Offside Front Upper Direction indicator not working |1.5.1c|1
Direction indicators not working N/S/ Front flasher not working |1.5.1c|1
Stop lamp remains on when the brake is released Stop lamp on at all times |1.3.1e|1
Front wheel spindle securing nut locking device missing |2.3.3a|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Nearside Rear An item not tested |Manual|1
Offside Rear An item not tested |Manual|1
Centre Front An item not tested |Manual|1
Centre Front Front position lamp does not illuminate immediately when switched on dip |1.1.3a|1
Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Central Front Steering damper insecure Steering damper mounting bush worn to excess. |2.1.2d|1
Stop lamp with a multiple light source more than 1/2 not functioning rear brake light bulb blown |4.3.1 |a| |ii||1
Nearside Rear Footrest insecure |6.2.1a|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear position lamp deteriorated and function impaired |1.1.1b|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp damaged and function impaired |1.2.3a|1
Brake master cylinder insecurely mounted |3.2.B1a|1
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Rear Direction indicator not working |1.5.1c|1
Offside Front Brake component worn and seriously reduced in strength |3.2.A1|1
Nearside Front wheel spindle securing nut locking device insecure |2.3.5a|1
Offside Front wheel spindle securing nut locking device insecure |2.3.5a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy