MOT History from tests of petrol BMW K1100LTs year 1996

Review the list of common BMW K1100LT failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history

Pass percent:87.07%

(The average a petrol BMW K1100LT year 1996 passes without issue)

Based on:263 MOT Tests

Most common failures	No# failures
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp aim out of alignment	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
An item not tested \|Manual\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Registration plate issues	1
Nearside Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Brake component is excessively corroded \|3.1.5\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Nearside Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Brake lever cannot be released smoothly \|3.1.3d\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Nearside Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	1
Offside Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	1
Brake hose excessively deteriorated	1
Nearside Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp aim out of alignment	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
An item not tested \|Manual\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Registration plate issues	1
Nearside Front Brake disc\|s\| securing bolt\|s\| missing \|3.2.A1g\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Brake hose leaking fluid \|3.2.B4\|	1
Brake component is excessively corroded \|3.1.5\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	1
Nearside Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Brake lever cannot be released smoothly \|3.1.3d\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Nearside Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	1
Offside Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	1
Brake hose excessively deteriorated	1
Nearside Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1

MOT History from tests of petrol BMW K1100LTs year 1996

Find us on Facebook