Most common failures | No# failures |
---|
Headlamp aim out of alignment | 62 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 47 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 47 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 39 |
Drive chain excessively loose |6.2.1d| | 26 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 25 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 22 |
Steering headbearing has excessive free play |2.2.2| | 19 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Registration plate issues | 17 |
Drive chain worn to excess |6.2.1e| | 15 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 14 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 12 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 11 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 10 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Horn not working |1.7.3a| | 7 |
Drive chain excessively tight |6.2.1d| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Drive chain excessively loose |6.2.1d| | 4 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Indicator switch insecure |1.5.4| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Brake pedal pivots excessively worn |3.1.3a| | 4 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 3 |
Registration plate lamp issues | 3 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Headlamp switch insecure |1.2.4| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear Brake pedal insecure |3.1.2a| | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Rear Drive chain excessively loose |6.2.1d| | 2 |
Brake pedal insecure |3.1.2a| | 2 |
Stop lamp insecure |1.3.3b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |