Most common failures | No# failures |
---|
Headlamp aim out of alignment | 79 |
Registration plate issues | 23 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 12 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
Drive chain excessively loose |6.2.1d| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Horn not working |1.7.3a| | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Registration plate lamp issues | 5 |
Front Brake excessively binding |1.2.1 |f|| | 5 |
Drive chain excessively loose |6.1.7 |c| |i|| | 4 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Horn not working |1.7.3a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 2 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 2 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering movement excessively `notchy` with the wheel raised bottom bearings |2.2.1b| | 1 |
Nearside Upper Front suspension assembly component loose |2.3.1| | 1 |
Nearside Lower Front suspension assembly component loose |2.3.1| | 1 |
Headlamp light source and lamp not compatible H I D bulbs fitted |4.1.4 |c|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering headbearing has excessive wear or free play Excessive noch on middle |2.2.2 |f| |i|| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp not working on front brake lever |4.3.1 |a| |ii|| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever cracked |3.1.2c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Footrest insecure |6.2.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Centre Front Wheel spoke excessively loose |4.2.1b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Lower Motorcycle structure joining/attachment plate or fastening insecure main stand bolt missing , stand not secure could impede rear wheel |6.1.1 |b| |i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock adjust |2.1.4 |b|| | 1 |
Offside Drive chain excessively loose |6.2.1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Rear Brake component insecure Reservoir insecure |1.1.21 |c|| | 1 |
Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Front Front shock absorber seal failed and leaking oil oil leaking from left hand fork leg |2.3.3| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Brake disc in such a condition that it is seriously weakened |1.1.14 |a| |ii|| | 1 |
Headlamp aim headlamp damaged and function impaired bulb retaining clip missing |1.2.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam bulb retaining clip missing |1.2.2a|i|| | 1 |
Shock absorber has a serious fluid leak right hand fork seal is leaking |5.3.2 |b|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected large notch in centre of steering |2.2.2 |f| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen bulb not a good fit - refitted but falls out of position again |4.1.2 |a|| | 1 |
Front Brake fluid contaminated brake fluid milky |1.8 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake pedal |1.3.1a| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Front Horn not working |1.7.3a| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Drive belt excessively loose. |6.2.1d| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp aim beam image kick up to the offside head light dip beam masker fitted at time of test |1.6| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp remains on when the brake is released Rear control |1.3.1e| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Fairings insecure and likely to impede the steering Mud guard bolt broken. |2.1.2e| | 1 |
Brake locking device missing front caliper split pin missing |3.2.A1e| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake fluid reservoir cap missing |3.2.B1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Wheel spoke cracked 2 broken spokes in rear wheel (5.2.2 (d)) | 1 |
Front Shock absorber has a serious fluid leak both forks leaking (5.3.2 (b)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |