MOT History from tests of petrol BMW C1s year 2002

Review the list of common BMW C1 failures below or to perform a specific mot history check on your BMW then use our popular KnowYourCar service

mot history

Pass percent:80.33%

(The average a petrol BMW C1 year 2002 passes without issue)

Based on:1,815 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	35
Front wheel bearings are excessively rough \|2.3.5b\|	25
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	24
Front wheel bearings have excessive free play \|2.3.5b\|	22
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	21
Headlamp switch faulty \|1.2.4\|	19
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	18
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	17
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	15
Registration plate issues	15
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Headlamp aim not tested \|1.6\|	13
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	12
Stop lamp remains on when the brake is released \|1.3.1e\|	12
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	11
Front suspension has inadequate damping effect. \|2.3.6c\|	11
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Headlamp deteriorated and function impaired \|1.2.3a\|	10
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	8
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	8
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	7
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	7
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	7
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	7
Nearside Rear Direction indicator insecure \|1.5.3b\|	7
Front Hydraulic brake control feels spongy \|3.1.4a\|	6
Front Roller brake test indicates a binding brake \|3.3.A1a\|	6
Headlamp aim beam image kick up to the offside \|1.6\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	5
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	4
Front Wheel has an excessively eccentric bead rim. \|4.2.2\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	3
Handlebar mounting clamp bolt loose \|2.1.1a\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Offside Rear Direction indicator insecure \|1.5.3b\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp switch insecure \|1.2.4\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Front mudguard insecure \|2.3.7\|	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear position lamp insecure \|1.1.1c\|	2
Brake performance not tested \|3.3\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	2
Rear suspension component cracked \|2.4.A.1a\|	2
Front Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	2
Brake pipe excessively corroded	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Steering linkage has excessive free play \|2.2.2\|	2
Stop lamp missing \|1.3.3a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	35
Front wheel bearings are excessively rough \|2.3.5b\|	25
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	24
Front wheel bearings have excessive free play \|2.3.5b\|	22
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	21
Headlamp switch faulty \|1.2.4\|	19
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	18
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	17
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	15
Registration plate issues	15
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Headlamp aim not tested \|1.6\|	13
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	12
Stop lamp remains on when the brake is released \|1.3.1e\|	12
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	11
Front suspension has inadequate damping effect. \|2.3.6c\|	11
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Headlamp deteriorated and function impaired \|1.2.3a\|	10
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	8
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	8
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	7
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	7
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	7
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	7
Nearside Rear Direction indicator insecure \|1.5.3b\|	7
Front Hydraulic brake control feels spongy \|3.1.4a\|	6
Front Roller brake test indicates a binding brake \|3.3.A1a\|	6
Headlamp aim beam image kick up to the offside \|1.6\|	5
Front Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	5
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	4
Front Wheel has an excessively eccentric bead rim. \|4.2.2\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	4
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	3
Handlebar mounting clamp bolt loose \|2.1.1a\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Offside Rear Direction indicator insecure \|1.5.3b\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp switch insecure \|1.2.4\|	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Front mudguard insecure \|2.3.7\|	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear position lamp insecure \|1.1.1c\|	2
Brake performance not tested \|3.3\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	2
Rear suspension component cracked \|2.4.A.1a\|	2
Front Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Rear Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	2
Brake pipe excessively corroded	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Steering linkage has excessive free play \|2.2.2\|	2
Stop lamp missing \|1.3.3a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2

MOT History from tests of petrol BMW C1s year 2002

Find us on Facebook