Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear Brake disc|s| cracked |3.2.A1g| | 4 |
Registration plate lamp issues | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brake pipe excessively corroded | 2 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Offside Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear brake binding | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Brakes imbalanced across an axle | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Forks insecure pinch bolt loose |2.2.2 |d| |i|| | 1 |
Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen beam image upside down |1.6.B.1| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Rear Brake hose leaking |3.6.A.1| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Rear reflector missing |1.5.1a| | 1 |
Nearside Rear Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Centre Steering lock stop ineffective |2.1.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Brake hose excessively twisted |3.2.B3a| | 1 |
Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn not working (7.7 (a)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
Front Exhaust has a major leak of exhaust gases Joint (6.1.2 (a)) | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill/floor pan (6.2.2 (d) (i)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill by jacking point (6.1.1 (c) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Rear Service brake effort inadequate at a wheel Both sides (1.2.1 (a) (i)) | 1 |