MOT History from tests of petrol BENELLI VELVETs year 2003

Review the list of common BENELLI VELVET failures below or to perform a specific mot history check on your BENELLI then use our popular KnowYourCar service

mot history

Pass percent:71.00%

(The average a petrol BENELLI VELVET year 2003 passes without issue)

Based on:100 MOT Tests

Most common failures	No# failures
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Headlamp aim out of alignment	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Front Horn not working \|1.7.3a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Riders seat insecure \|6.2.1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Riders seat insecure \|6.2.1a\|	1
Rear Rear reflector on motorcycle obscured \|1.4.1\|	1
Front Front position lamp insecure \|1.1.1c\|	1
Front Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	1
Nearside Front Direction indicator likely to become detached Damaged \|4.4.1 \|c\| \|ii\|\|	1
Offside Rear Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Front Brake disc contaminated By fork oil. \|1.1.14 \|b\|\|	1
Registration plate lamp issues	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Nearside Front Direction indicator insecure \|1.5.3b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Offside Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Brake lever insecure \|3.1.2a\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Brake disc\|s\| excessively pitted \|3.2.A1l\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Headlamp switch faulty \|1.2.4\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Headlamp aim out of alignment	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Front Horn not working \|1.7.3a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Riders seat insecure \|6.2.1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Riders seat insecure \|6.2.1a\|	1
Rear Rear reflector on motorcycle obscured \|1.4.1\|	1
Front Front position lamp insecure \|1.1.1c\|	1
Front Direction indicators not working \|1.5.1c\|	1
Offside Rear Direction indicators not working \|1.5.1c\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Front Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	1
Nearside Front Direction indicator likely to become detached Damaged \|4.4.1 \|c\| \|ii\|\|	1
Offside Rear Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	1
Front Brake disc contaminated By fork oil. \|1.1.14 \|b\|\|	1
Registration plate lamp issues	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Nearside Front Direction indicator insecure \|1.5.3b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Offside Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Front suspension has inadequate damping effect. \|2.3.6c\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Brake lever insecure \|3.1.2a\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Brake disc\|s\| excessively pitted \|3.2.A1l\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Headlamp switch faulty \|1.2.4\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1

MOT History from tests of petrol BENELLI VELVETs year 2003

Find us on Facebook