>

MOT History from tests of petrol BEDFORD MOTORs year 1985

Review the list of common BEDFORD MOTOR failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history
Pass percent:48.15%
(The average a petrol BEDFORD MOTOR year 1985 passes without issue)
Based on:54 MOT Tests
Most common failuresNo# failures
Brakes imbalanced across an axle11
Brake pipe excessively corroded7
Windscreen wiper does not clear the windscreen effectively5
Front brake application uneven4
Parking brake: efficiency below requirements |3.7.B.7|3
Offside Front position lamp|s| not working |1.1.A.3b|3
Rear brake binding3
Exhaust has a major leak of exhaust gases |7.1.2|2
Nearside Seat belt retracting mechanism defective |5.2.5b|2
Offside Headlamp not working on main beam |1.7.5a|2
Nearside Front position lamp|s| not working |1.1.A.3b|2
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Horn not working |1.6.2a|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|2
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|2
Service brake: efficiency below requirements |3.7.B.7|2
Rear parking brake recording little or no effort2
Headlamp aim out of alignment2
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d|1
Offside Front Direction indicator not working |1.4.A.2c|1
Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Offside Seat belt retracting mechanism defective |5.2.5b|1
Shock absorber has negligible damping effect |2.7.5|1
Offside Stop lamp not working |1.2.1b|1
Nearside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Offside Headlamp adversely affected by the operation of another lamp |1.7.5c|1
Offside Direction indicators not working |1.4.A.2c|1
Nearside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Emissions not tested |7.3.A.1|1
Offside front brake recording little or no effort |3.7.B.5a|1
Nearside Front Service brake grabbing severely |3.7.C.2|1
Service brake is causing the steering wheel to severely pull one way |3.7.C.2|1
Brake pipe inadequately supported |3.6.B.1|1
Exhaust engine idle speed too high |7.3.A.2a|1
Brake hose excessively deteriorated1
Rear Brake pipe inadequately supported |3.6.B.1|1
Offside Rear fog lamp emits a light other than red |1.3.2e|1
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b|1
Offside Rear fog lamp missing |1.3.2a|1
Rear fog lamp switch missing |1.3.1a|1
Front brake disc in such a condition that it is seriously weakened1
Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Shock absorbers has a serious fluid leak1
Brake performance not tested (1.2.1 (g))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear fog lamp not working (4.5.1 (a) (ii))1
Emissions not tested (8.2.2.2 (e))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Steering rack insecure to the extent there is excessive movement at the mountings (2.1.3 (a) (ii))1
Front All position lamps not working |1.1.A.3b|1
Rear Rear position lamp|s| not working |1.1.A.3b|1
Front Headlamp not working on dipped beam |1.7.5a|1
Obligatory mirror insecure |8.1.1|1
Offside Rear fog lamp not working |1.3.2b|1
Rear fog lamp not working |1.3.2b|1
Nearside Headlamp switch faulty |1.7.1|1
Nearside Front Lower Brake pipe leaking |3.6.A.1|1
Offside Front Front position lamp|s| not working |1.1.A.3b|1
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a|1
Offside Rear Rear position lamp|s| insecure |1.1.A.3a|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear Shock absorber has negligible damping effect |2.7.5|1
Offside Rear Shock absorber has negligible damping effect |2.7.5|1
Offside rear brake recording little or no effort |3.7.B.5a|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Nearside Headlamp not working on main beam |1.7.5a|1
Nearside Stop lamp not working |1.2.1b|1
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b||1
Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b||1
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Headlamp not working on main beam |4.1.1 |a| |ii||1
Registration plate lamp issues1
Nearside Front Position lamp not working |4.2.1 |a| |ii||1
Hazard warning switch faulty |1.4.B.1d|1
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Rear Exhaust system not adequately supported |7.1.1|1
Rear brake application uneven1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Nearside Front Direction indicator not working |1.4.A.2c|1
Offside Rear Electrical wiring inadequately supported |1.9.2a|1
Nearside Rear Wheel stud|s| missing |4.2.A.1e|1
Nearside Rear Wheel nut|s| missing |4.2.A.1e|1
Nearside Side repeater not working |1.4.A.2c|1
Offside Side repeater not working |1.4.A.2c|1
Rear Brake load sensing valve linkage seized |3.6.E.3|1
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|1
Brake pedal spongy |3.3.B.1b|1
Windscreen has damage1
Rear fog lamp missing |1.3.2a|1
Rear fog lamp tell tale missing |1.3.1b|1
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy