>

MOT History from tests of petrol BEDFORD CF2s year 1982

Review the list of common BEDFORD CF2 failures below or to perform a specific mot history check on your BEDFORD then use our popular KnowYourCar service

mot history
Pass percent:25.00%
(The average a petrol BEDFORD CF2 year 1982 passes without issue)
Based on:32 MOT Tests
Most common failuresNo# failures
Registration plate lamp issues6
Brakes imbalanced across an axle6
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f|5
Offside Rear fog lamp not working |1.3.2b|5
Rear brake application uneven4
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|4
Nearside Stop lamp not working |1.2.1b|4
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|4
Rear brake binding3
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|3
Front brake application uneven3
Brake pipe excessively corroded3
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|3
Parking brake: efficiency below requirements |3.7.B.7|2
Offside Rear position lamp|s| not working |1.1.A.3b|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Rear fog lamp not working |1.3.2b|2
Horn not working |1.6.2a|2
Direction indicators not working |1.4.A.2c|2
Hazard warning lamps inoperative |1.4.B.1b|2
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|2
Offside Headlamp not working on dipped beam |1.7.5a|2
Hazard warning switch faulty |1.4.B.1d|2
Windscreen wiper does not clear the windscreen effectively2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Nearside Rear Direction indicator not working |1.4.A.2c|2
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))2
Front Body has a sharp edge caused by corrosion Bumper |6.1.C.1|1
Offside Front position lamp|s| not working |1.1.A.3b|1
Offside Side repeater not working |1.4.A.2c|1
Offside Stop lamp not working |1.2.1b|1
Offside Front Brake hose leaking |3.6.A.1|1
Offside Rear wheel bearing rough when rotated |2.6.1|1
Service brake: efficiency below requirements |3.7.B.7|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Nearside Rear position lamp|s| not working |1.1.A.3b|1
Offside Indicator tell tale inoperative |1.4.A.2a|1
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3|1
Headlamp insecure |1.7.3|1
Centre Exhaust system not adequately supported |7.1.1|1
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h|1
Offside Front Upper Front suspension ball joint dust cover missing |2.4.G.2|1
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|1
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Exhaust system not adequately supported |7.1.1|1
Nearside Front Windscreen wiper blade missing |8.2.2|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Offside Rear rear brake recording little or no effort |3.7.B.5a|1
Hazard warning tell tale not working correctly |1.4.B.1e|1
Steering column top bearing excessively worn |2.1.2c|1
Offside Steering rack gaiter split |2.2.D.2d|1
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a|1
Nearside Direction indicator flashing less than 60 times a minute |1.4.A.2g|1
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||1
Nearside Rear reflector excessively damaged so that its function is impaired |1.5.1c|1
Front Direction indicators not working |1.4.A.2c|1
Rear Direction indicators not working |1.4.A.2c|1
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Exhaust has a major leak of exhaust gases From joint on silencer. |7.1.2|1
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Front wheel bearing rough when rotated |2.5.A.2|1
Offside Front wheel bearing rough when rotated |2.5.A.2|1
Nearside Front Direction indicator flashing less than 60 times a minute |1.4.A.2g|1
Front Exhaust system not adequately supported |7.1.1|1
Nearside Front Lower Shock absorber insecure |2.7.2b|1
Windscreen wiper control is inaccessible to the driver |8.2.1a|1
Nearside Headlamp not working on main beam |1.7.5a|1
Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Rear Exhaust system not adequately supported |7.1.1|1
Nearside Front Shock absorber has a serious fluid leak |2.7.3|1
Offside Front Position lamp not working |4.2.1 |a||1
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b||1
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Rear fog lamp tell tale missing |1.3.1b|1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Windscreen washer not working 1
Horn not working (7.7 (a) (ii))1
Nearside Rear All direction indicators not working (4.4.1 (a) (ii))1
Offside Front Cab steps so insecure it is likely to cause injury (6.2.8 (a) (ii))1
Emissions not tested engine will not idle (8.2.1.2 (d))1
Service brake efficiency below requirements (1.2.2 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy