Most common failures | No# failures |
---|
Registration plate lamp issues | 51 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 28 |
Headlamp aim out of alignment | 28 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 25 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 20 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
Brake pipe excessively corroded | 18 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
Brakes imbalanced across an axle | 15 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 13 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 12 |
Parking brake: efficiency below requirements |3.7.B.7| | 10 |
Rear brake application uneven | 9 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Offside Rear fog lamp not working |1.3.2b| | 8 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Windscreen wiper does not clear the windscreen effectively | 8 |
Offside Rear Rear fog lamp not working |1.3.2b| | 8 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Rear parking brake recording little or no effort | 7 |
Brake hose excessively deteriorated | 7 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 7 |
Service brake: efficiency below requirements |3.7.B.7| | 6 |
Nearside Side repeater not working |1.4.A.2c| | 6 |
Nearside Stop lamp not working |1.2.1b| | 6 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 5 |
Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Horn not working |1.6.2a| | 5 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Nearside Rear Shock absorber detached |2.7.2b| | 5 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Registration plate issues | 4 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 4 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 4 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Windscreen has damage | 3 |
Rear brake binding | 3 |
Rear Fuel pipe leaking |7.2.3| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 3 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Fuel pipe leaking |7.2.3| | 3 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 2 |
Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 2 |
Nearside Front front brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Side repeater missing |1.4.A.2b| | 2 |
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Side repeater not working |1.4.A.2c| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Front constant velocity joint is insecure |2.5.C.1b| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Front brake application uneven | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 2 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Fuel tank leaking |7.2.3| | 2 |
Offside Rear rear brake grabbing severely |3.7.A.5b| | 2 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Outer Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
Brake operation stored air pressure or vacuum depletes when ancillary equipment is operated |3.3.E.4| | 1 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Tie bar/rod locating pin insecure |2.4.G.3a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Front Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Front Side repeater incorrect colour |1.4.A.2f| | 1 |
Rear wheel bearing has excessive play |2.6.2| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Side repeater incomplete |1.5.A1b| | 1 |
Offside Front Side repeater incomplete |1.5.A1b| | 1 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Offside Front Braking system leaking |3.6.A.1| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front brake disc contaminated by grease |3.5.1h| | 1 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Main beam `tell-tale` not working |1.7.4c| | 1 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
Brake cable has restricted free movement |3.5.1k| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Offside Shock absorber detached |2.7.2b| | 1 |
Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Rear Shock absorber detached |2.7.2b| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Fuel system component leaking |7.2.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
An item not tested |Manual| | 1 |
Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Side repeater incomplete |1.5.A1b| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Rear Fuel hose leaking |7.2.3| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
Nearside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
Front Upper Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
Nearside Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front brake caliper leaking |3.6.A.1| | 1 |