| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 42 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 13 |
| Horn not working |1.7.3a| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 9 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 9 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
| Registration plate issues | 7 |
| Registration plate lamp issues | 6 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 5 |
| Horn not working |7.7 |a| |ii|| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 4 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 4 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 4 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 4 |
| Riders seat insecure (6.2.5 (a) (ii)) | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Brake hose excessively deteriorated | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 3 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Steering linkage has excessive free play |2.2.2| | 2 |
| Brake hose damaged | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Nearside Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Offside Direction indicators not working |1.5.1c| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Headlamp aim headlamp damaged and function impaired no beam patten |1.2.3a| | 1 |
| Fuel cap ineffective Wont open to check seal (6.1.3 (b) (i)) | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Stop lamp not working control |4.3.1 |a| |ii|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil leaking to excess |2.3.3| | 1 |
| Front Headlamp aim headlamp damaged and function impaired main beam inop |1.2.3a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Direction indicator incorrect colour Both front (4.4.3 (a)) | 1 |
| Direction indicators affected by the operation of another lamp all |1.5.1c| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Brake lever has insufficient reserve travel rear brake lever |1.1.2 |a|| | 1 |
| Nearside Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front position lamp does not illuminate immediately when switched on x3 |1.1.3a| | 1 |
| Front Brake hose leaking (1.1.12 (c)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front position lamp missing |1.1.1a| | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Centre Rear Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Front Brake lever cracked |3.1.2c| | 1 |
| Nearside Rear Lower Motorcycle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Offside Rear Lower Motorcycle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Rear Brake excessively binding rear brake actuating arm not releasing |1.2.1 |f|| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Handlebar retaining device loose handle bar bolt/clamp loose. |2.2.1 |b| |i|| | 1 |
| Front Shock absorber has negligible damping effect no damping effect. |5.3.2 |b|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front Brake |1.3.1a| | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake caliper lock tabs not locked onto bolts |6.2.1h| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake lever pivot bolt loose |6.2.1h| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake lever lock nut missing |6.2.1h| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Riders seat insecure |6.2.1a| | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure Mudguard/ licence plate insecure; likely to catch and impede rear wheel rotation. (6.1.1 (b) (i)) | 1 |
| Horn not working Horn switch stuck; horn stays on (7.7 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Headlamp at least one does not illuminate on main beam Main beam fails to illminate
|1.2.2a|ii|| | 1 |
| Front Handlebar mounting clamp bolt loose handle bars loose
|2.1.1a| | 1 |
| Nearside Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Front Lower Headlamp not working on dipped beam bulb (4.1.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play too much free play at headstock (2.2.2 (f) (i)) | 1 |
| Fuel cap leaking fuel cap seal cracking (6.1.3 (b) (i)) | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies control 2 |1.3.1a| | 1 |
| Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
| Stop lamp not working Front control. |4.3.1 |a| |ii|| | 1 |
| Front Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
| Rear Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Lower Horn not working |7.7 |a| |ii|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear Rear wheel bearings have excessive free play unsafe to ride |2.4.A.2c| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear suspension bush has excessive free play mounting loose |2.4.A2a|i|| | 1 |
| Nearside Front Motorcycle structure excessively damaged faring sharp damage |6.1.1a| | 1 |
| Rear Upper Rear suspension bush excessively deteriorated shock bush |2.4.A2a|i|| | 1 |
| Nearside Front Upper Front suspension assembly component excessively corroded. stanchion |2.3.1| | 1 |
| Offside Front Upper Front suspension assembly component excessively corroded. stanchion |2.3.1| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear shock absorber has inadequate damping effect. and bottoms out at end of travel |2.4.A.3b| | 1 |
| Offside Brake lever mounting insecure front brake lever assy |3.1.2a| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Rear suspension bush has excessive free play rear suspension |2.4.A2a|i|| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Throttle operating incorrectly revving to high causing bike to pull when stationary (6.2.7 (a) (i)) | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp not working when front brake is applied |4.3.1 |a| |ii|| | 1 |
| Nearside Brake lever mounting cracked |3.1.2c| | 1 |
| Rear Stop lamp insecure |1.3.3b| | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Front Lower Motorcycle structure has a fracture which is likely to adversely affect braking or steering frame split at underside headstock (6.1.1 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling road test steering affected (2.4 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling road test handling affected (2.4 (a)) | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Throttle operating incorrectly throttle has no affect on engine |6.2.1f| | 1 |
| Headlamp at least one does not illuminate on dipped beam lights stuck on main beam |1.2.2a|i|| | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure body work round steering loose (6.1.1 (b) (i)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure bodywork around rear light area (6.1.1 (b) (i)) | 1 |
| Nearside Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Shock absorber likely to become detached has detached (5.3.2 (a) (ii)) | 1 |
| Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Stop lamp with a multiple light source more than 1/2 not functioning |4.3.1 |a| |ii|| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear suspension bush has excessive free play all rear |2.4.A2a|i|| | 1 |
| Central Front Exhaust has a major leak of exhaust gases new exhaust fitted |6.1.2 |a|| | 1 |
| Direction indicator incorrect colour all |1.5.1b| | 1 |
| Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Brake lever has insufficient reserve travel Rear Brake leaver (1.1.2 (a)) | 1 |
| Central Exhaust mounting does not fully support the exhaust system bolt loose |7.1.1.c| | 1 |
| Front Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
| Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Lower Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen bulb not seated correctly |1.6.B.1| | 1 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up Should not be used on the road.. (5.1.3 (a) (ii)) | 1 |
| Headlamp lens missing (4.1.1 (b) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired no beam pattern |1.2.3a| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Fuel system component insecure carb loose missing air box |7.2.1b| | 1 |
| Front shock absorber seal failed and leaking oil fork seal leaking |2.3.3| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Brake lever has inadequate reserve travel rear brake |3.1.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front suspension has inadequate damping effect. rear shock |2.3.6c| | 1 |
| Exhaust mounting missing silencer bracket ahs a crack in, and will weaken other mounts |7.1.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure Front faring (6.1.1 (b) (i)) | 1 |
| Shock absorber has negligible damping effect both fronts (5.3.2 (b)) | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Direction indicator incorrect colour both fronts |1.5.1b| | 1 |
| Shock absorber has a serious fluid leak both fronts |5.3.2 |b|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Stop lamp not working From front brake |4.3.1 |a| |ii|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Handlebar mounting so insecure that steering is adversely affected mount between forks and handlebars |2.2.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected engine cuts out on right lock (6.2.7 (a) (ii)) | 1 |
| Front Headlamp aim not tested lights not checked engine will not start |1.6| | 1 |
| Stop lamp not working stop lamp not working when rear brake lever applied (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake not working stop lamp |1.3.1a| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |