| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Rear parking brake recording little or no effort | 3 |
| Horn not working |1.6.2a| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Headlamp aim out of alignment | 2 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Brakes imbalanced across an axle | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 2 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Nearside Rear front brake binding |3.7.B.1| | 1 |
| Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Braking system leaking |3.6.A.1| | 1 |
| Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| An item not tested |Manual| | 1 |
| Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Offside Front Steering system lock to lock check twists a brake hose |2.2.D.2b| | 1 |
| Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Steering column universal joint is excessively deteriorated |2.1.5| | 1 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake cable has restricted free movement |3.5.1k| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |