MOT History from tests of petrol AUSTIN MONTEGOs year 1990

Review the list of common AUSTIN MONTEGO failures below or to perform a specific mot history check on your AUSTIN then use our popular KnowYourCar service

mot history

Pass percent:67.86%

(The average a petrol AUSTIN MONTEGO year 1990 passes without issue)

Based on:28 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	3
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Centre Brake pedal anti-slip provision missing \|3.3.A.1b\|	1
Nearside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Offside Steering rack gaiter insecure \|2.2.D.2d\|	1
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Obligatory mirror insecure \|8.1.1\|	1
Registration plate lamp issues	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Rear parking brake recording little or no effort	1
Horn not working (7.7 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Brake pipe excessively corroded	3
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Centre Brake pedal anti-slip provision missing \|3.3.A.1b\|	1
Nearside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Offside Steering rack gaiter insecure \|2.2.D.2d\|	1
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Obligatory mirror insecure \|8.1.1\|	1
Registration plate lamp issues	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Rear parking brake recording little or no effort	1
Horn not working (7.7 (a) (ii))	1

MOT History from tests of petrol AUSTIN MONTEGOs year 1990

Find us on Facebook