Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 14 |
Registration plate lamp issues | 11 |
Brake hose excessively deteriorated | 11 |
Brakes imbalanced across an axle | 9 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Headlamp aim out of alignment | 8 |
Rear parking brake recording little or no effort | 7 |
Brake pipe excessively corroded | 7 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 6 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Offside rear brake recording little or no effort |3.7.B.5a| | 5 |
Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Rear brake binding | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Offside Side repeater not working |1.4.A.2c| | 4 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front front brake binding |3.7.B.1| | 4 |
Nearside Side repeater not working |1.4.A.2c| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear brake application uneven | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside Front All position lamps not working |1.1.A.3b| | 2 |
Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Brake pedal anti-slip provision missing |1.1.2 |c|| | 2 |
Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Nearside front brake juddering severely |3.7.A.2b| | 2 |
Offside front brake juddering severely |3.7.A.2b| | 2 |
Front brake application uneven | 2 |
Offside Stop lamp not working |1.2.1b| | 1 |
Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 1 |
Offside Subframe mounting prescribed area is excessively corroded Rear floor |2.4.A.3| | 1 |
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front Statutory seat belt missing |5.1.1| | 1 |
Offside Front Statutory seat belt missing |5.1.1| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Fluid suspension unit displaced |2.4.D.1a| | 1 |
Offside Upper Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Nearside Front engine mounting deteriorated resulting in excessive movement rear |6.1.D.1a| | 1 |
Nearside engine mounting deteriorated resulting in excessive movement front |6.1.D.1a| | 1 |
Offside engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
Nearside Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Nearside Front Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded floor to outer sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded floor to bulkhead |2.4.A.3| | 1 |
Nearside Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Brake linkage has restricted free movement |3.5.1k| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Rear Brake pipe fouled by moving parts across axle |3.6.B.2a| | 1 |
Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Rear Brake valve insecurely mounted |3.6.A.2a| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Direction indicator not working Both. (4.4.1 (a) (ii)) | 1 |
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Nearside Front Suspension arm pin or bush excessively worn Hydro elastic ball joint. (5.3.4 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. (5.3.6 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and sill |6.1.1 |c| |i|| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
Offside Front Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Front front brake juddering severely |3.7.A.2b| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Inner Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear Brake pipe leaking |3.6.A.1| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Windscreen washer not working | 1 |
Nearside Rear Sub-frame corroded and seriously weakened |5.3.3 |b| |i|| | 1 |