| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Registration plate issues | 10 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 4 |
| Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii)) | 3 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn curved arm (5.3.4 (a) (i)) | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Brake warning device not identifying low pressure |1.1.4 |a| |ii|| | 1 |
| Offside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear arm |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear arm |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Offside Front Suspension arm pin or bush likely to become detached Upper , Forward and rear arms, inner bushs torn out. (5.3.4 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn curved arm (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp levelling device inoperative insecure (not attach to lower arm) (4.1.5 (a)) | 1 |
| Offside Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached Upper , Forward and rear arms, inner bushs torn out. (5.3.4 (a) (ii)) | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Side repeater missing (4.4.1 (a) (ii)) | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases front pipe flexi section |7.1.2| | 1 |
| Front Headlamp cleaning device for LED or HID headlamp inoperative |4.1.6 |a| |ii|| | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Offside Front Exhaust has a major leak of exhaust gases the flexi has snapped and gases are leaking (6.1.2 (a)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn inner rear bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn inner rear bush (5.3.4 (a) (i)) | 1 |